Jump to content
  • entries
    51
  • comments
    12
  • views
    3,271

About this blog

Ramblings and documenting of various experiences, ideas...etc. from the Ivory Tower Collections.

Entries in this blog

Atari 7800 Powering On / Off issues...

As stated in another blog, I have a few 7800 sent to me for repairs and eventual upgrades. This 7800 had an interesting problem where as soon as you plugged in the DC power to the console, it would immediately power on and would NOT turn off. While there are a few components in the mix that can cause, this, I've found really only two components well technically 3 that should be looked into as possibilities:   The first component and the one most people already know about, is the power

Get those Game Gears Recapped!!!

I know...I know... you hear it everywhere that everything in excess of so many years needs new capacitors and that will fix everything. Well, that isn't always the case as there are many electronics that date from much longer than 40 years ago whose caps while not perhaps quite within their original spec, are still working and doing their job. However, in the 90s there was an issue where most capacitor manufactures essentially had to start over with the formulas they had been using and as a resu

The Ivory Tower 5200 got some TLC

I originally did most of the work on this 5200 about 8 years ago. It was also one of the first projects I did and to be honest, the wiring work inside wasn't that great. For some time I had wanted to redo it all similar to how I redid my 7800 about a year ago but just never got around to it. Well, now that I have a new BackBit Pro flash cartridge and it was designed to allow resets back to the game menu, I felt it was time to perform a small modification to allow this function of my BackBit Pro

5200 with very odd keypad / fire button issues

I've done a video on something similar to this but here is a rundown on what I was encountering: A 5200 sent in for services had a note stating that top fire button wouldn't work on the console. This is an issue I've run into before and in fact have created a video on it. It can be due to the controller having a broken trace of course on the flex circuit inside it. But... it can also very well be due to a faulty 4052 MUX chip inside the console located at U13 or A13 depending on the age of
×
×
  • Create New...