Lynxman

Sound "Klax wave" have lower volume. The title screen with the amazing music is missing. It is not possible to choose easy, medium, hard. Game play i could find no difference. (tested only 20 minutes...)

Please send Pics. (Cart)

You can add additional 16 pcs 1Mx1 chips (120ns or faster). But you have to deactivate the 512Kb on Board. Connect RAS0 and CAS0x lines at Memory chip side of the internal 512Kb to +5V. Or remove the internal 512Kb. Check if RAS0 and CAS0x from MMU side is connected to the unpopulated sockets. Maximum memory for 520ST is 4MB. (without additional logic)

Same here. @vince: Do you accept order via PM?

Please make a video.

1st check the connection from Lynx to display-PCB. 2nd check if the connection from the display-PCB to the display panel is OK. 3rd contact McWill.

I send a postcard from Italy to Germany 1985 and still not arrived. But in March 2016 1 week from Japan to Germany.

Maybe you should start to make it!

I think it is a Buffered clock. TOS 1.02 or higher should use it without additional driver. TOS 1.00 need a driver for the buffered clock.

6 sockets -> TOS ROM, not RAM! 16 memory chips -> 512Kb Memory, total RAM including Videoram 32 memory chips -> 1MB Memory, total RAM including Videoram 520STF(M) and 1040STF(M) is the same board, the difference is only the memory assembled.

@GadgetUK: you are right. Not possible to update your FlashCard.

@GadgetUK: please update your FlashCard with Firmware x.40, i added auto size mode and some other changes in the menu. In any case of questions please send me PM or email, because this thread is about jungle jack...

But if the comm app use the wrong settings it will not work. Please check the settings with a terminal after upload with the comm app. Please note: the change of the settings will only have an effect for the next upload.

If i remember correct the Gadget comm app was made for an old Firmware version. I don´t know if it work with the x.40 Firmware.

Checkred flag freeze if the connection via comlynx is disconnected. Most possible the comlynx wire have any problem or the connctors on Lynx side.

As already found, the header data is not correct. If my FlashCard is used with the latest Firmware (x.40) and the function "auto size" is used the game will not start. If you want to use "junglejackbeta1" with my FlashCard please switch off "auto size" and use the following setting: "256K/BLL" and "LNX" Or use a hex editor and change address $0007 from $04 to $00 Background: my FlashCard support 2nd bank and if the information for 2nd bank is found the setting of the memory interface may cause problems if 2nd bank is not used. @LX.NET: please set byte $07 of the header to $00 for the next beta to avoid trouble with my FlashCard.

You only need 1 Superidiot... Ninjabba is a very nice guy and i hope the game ROM will not start floating around in the internet.

Perfect NOS condition!

Ich habe 85 für ein A2600 mit einem Joystick (kannten wir damals schon nur unter dem Namen) für 179 DM gekauft. Und dann noch ein paar Kassetten für 19/29DM. Donkey Kong, Pitfall!, Enduro. Die Scans sind Super, die Kataloge habe ich immer gerne angeschaut. :-)

Yes, additional address decoding is required. Here you can find a schematic: http://atari4ever.free.fr/ Different solutions to fit TOS 2.06 in ST machines was made the last 20 years. Sometime included in other project. IDE-Cards, Magnum ST etc.

If? I think the question is "when it will happen"... I am sure someone will do it... The shell itself looks good!

This are no fakes. I have seen this kind of manuals in japan some years ago in 2 or 3 retro shops.

Easter egg? No one?

HI, yes, 10€ additional to USA -> total 65 €