[Vectrex Custom Controller]

Please put me down for two for any future runs.

[Lynx Multi Card Preorders]

I'd like to pre-order 1 muticart for Lynx model 2 as well thanks.

[Lynx II Voltage issue - Too high]

I was going to put a new McWill LCD in my Lynx II and wanted to swap out the basic stuff before doing so.

 

New Mosfet, zener, and cap kit. Started it up and Q8 blew. Measured voltage at the VCC and gnd as in step 3 of McWill's manual and got 8.9 I believe. Thought it was gone.

 

I put in a new transistor at Q8 and it starts up and I hear sound. Not sure if I have video as I took out the components not needed for the new LCD.

 

Remeasured voltage and I get 5.85V. I'm not sure at this point how to remedy that.

 

Rechecked all the caps. Even put back the old zener and mosfet to see if that was an issue and it's still 5.85.

 

Any ideas?

 

Thanks for any help.

[How To: Installing 5V Regulator Mod in an Atari Lynx II]

Any chance you could update the pics for this?

 

I've done this mod in the past and was going to do a couple more, but the pic links have expired.

 

Thanks.

[Need a Vectrex]

Did you happen to find that room where they had a Vectrex in a cab wired to display color?

[Happy New Year... XM shipping this month]

Letting everyone here know that bradd1978 has purchased my preorder for the XM Module.

 

Thanks.

[Happy New Year... XM shipping this month]

If anyone would like to purchase my preorder, please pm me.

 

I've just moved onto other things in the meantime and would rather it go to someone else.

 

Thanks.

[Happy New Year... XM shipping this month]

Wow. You wander in here every few weeks and good things happen.

 

I need to dig up my receipt.

[Lynx Multi Card Preorders]

Please put me on your list for your next go-around.

 

Thanks.

[Hive multi-cart - It's alive!]

Contact Joe Zbiciak directly. Contact and order information at http://ltoflash.leftturnonly.info/ .

 

I purchased an LTO Flash directly from Joe recently. He put together a really professional package.

 

It's not SD based, but honestly, I got tired of waiting for the Hive and the Flash does the same thing and is available NOW.

 

For some reason, he doesn't accept PayPal, so it can take a little longer to get the thing, but you'll be happy when you do.

[7800 XM update]

Curt should write a book about this.

[Atari Lynx II (PCB Rev. A) - no picture, no sound via loudspeaker]

Caps aren't always a magical elixir. Best Electronics has new LCDs for $15 or so. Give that a try and you can pick up one of their speaker upgrades as well.

[Lynx Multi Cart]

Count me in.

[How To: Installing 5V Regulator Mod in an Atari Lynx II]

Thanks guys. Mod was successful along with the lcd mod, but my power light is blinking now. With batteries or with the power supply.

 

Not sure why that is, but I may just leave it alone. That new lcd just knocks it out of the park.

[Lynx LCD Replacement/VGA-Out by McWill]

I'm on my second LCD mod and I have the C104129-001 rev board.

 

I performed the 5v mod and then installed the new LCD. I connected to the TPR test point as the directions would suggest and got a screen full of static. I switched off to connecting to the res solder point and though "Rats, static screen again." Game booted up though.

 

Just seems like during the boot up process, the screen is static the whole time and not for an instant. After that, game runs fine. My other problem is the power light blinks the whole time even when used with a power supply. Related or not I'm not sure.

 

Since the game works I'm tempted to just leave well enough alone

[How To: Installing 5V Regulator Mod in an Atari Lynx II]

I started to do the 5v mod on my board, but realized the induction coils are missing where they would normally be on other revisions. They are just jumpers on this one.

 

Question is would doing the 5v mod as is do any harm to this board?

[Game title Screen.. Then nothing]

I did a recap and it didn't do anything. Thanks for the info. I'll see if there's something I can do with the RAM.

[Game title Screen.. Then nothing]

I'm going to though a batch of broken Lynxs and one of these has an odd issue.

 

When powered up, it goes to the game title screen for a moment and then the video goes blank and no sound.

 

The power stays on the whole time.

 

Really odd compared to the other problems I'm seeing. I do have some cap replacements from Console5, so it's my next step as that's easy enough to do.

 

If anyone has any suggestions, please let me know.

 

Thanks.

[Hive multi-cart - It's alive!]

Just discovered this. Fantastic looking piece of hardware.

 

Looking forward to it.

[7800 XM update]

if anybody would care to purchase my preorder, send me a message.

 

Thanks.

[7800 XM update]

Good news indeed. Glad you're feeling better.

[7800 XM update]

I hope Santa brings Curt some customer service skills and god-like soldering abilities.

[The 7800XM]

Hey Curt. That's all I'm looking for. Thanks.

 

Your health is worth more than a goofy piece of hardware.

 

Hope things get better for you. Still got my 7800 dusted off and ready when you get those XMs complete.

[Atari 7800XM - 3.5 years later - Where is it?]

 

http://atariage.com/forums/topic/222984-atari-7800xm-35-years-later-where-is-it/?do=findComment&comment=2945437

Yeah. I'm aware of that. I've read everything for the past number of years.

 

Point is we get a cryptic 7800 anniversary release date that nobody can agree on and it seems that's passed.

 

Just looking for a hard release date or whatever is holding that up.

[Atari 7800XM - 3.5 years later - Where is it?]

It seems a little strange to me that Curt hasn't chimed in to say "OK guys. Here's the deal."

 

I'm not one to moan and groan about the lack of updates. He's a busy guy. I get that.

 

It's just that it's gotten to the point of being a little rude.