AtariGeezer
-
Posts
3,315 -
Joined
-
Last visited
Content Type
Profiles
Forums
Blogs
Gallery
Events
Store
Community Map
Everything posted by AtariGeezer
-
Think I mis-read, thought he was taking payments now and peeps higher on the list had priority over the requests. My mistake, I hope
-
I'm like 30th down on the list, but was the 12th who replied in this thread, so what is my real standing? I can send you $$ now by paypal, but where? Thanks, Jay
-
Well, I have my Atari 800 and ATR8000 to run true CP/M on instead... Like I said, I was just looking for another tool for the 64, not a new complete system
-
Woo Hoo!!! Got my SIO2SD back up and running with v3.0rc5, also set the Fusebits to (H: 0xC3, L: 0x3F)... Thanks again for the help...
-
Thank you for the clarification FJC
-
or should I use this one from This Thread instesd for AVRprgWin? Thanks again, Jay
-
Next Question: What program is used in that configuration? AVRprgWin's docs says to use different pins on the LPT port for SCK snd Reset...
-
I'd like 2x 4 Mbit carts please.
-
Thank you I'll run down to the parts store tomorrow and get the 6-pin header and make a cable...
-
Today I was testing an 835 modem with the SIO2SD connected and 835 made a weird noise. Afterward the LCD display on the SIO2SD came up with a row of blocks on the top line, and only the green LCD lights up... Can I reflash the atmel chip from the six pin connections on board? If so, How do I wire it up to an LPT Port? Or how can I get a new programmed Atmel for it? Thanks, Jay
-
Build Your Own Atari In Less Than An Hour!
AtariGeezer replied to beamer320i's topic in Atari 8-Bit Computers
I first thought that it was the redesigned ELF-II or KIM-1, but nope... -
LOL, some of us software developers too
-
Received the two carts today, the mounts are intact, but the bottom edge of one half of the case has a cut-out to allow space for the ROM to fit (when extended). Looks like someone had issues with these not fitting in properly or some tweeker had a "bright idea" ? I carefully took these apart and put the PCB's back to where they should be and they fit fine in an 800XL with the cases put back together. Good thing is that they both work
-
I downloaded #20 PDF yesterday, it's 119 megs and took about 10 minutes to download with firefox...
-
Anytime Glad to help out...
-
And here's the ATR's (both Sides)... Found it in my floppy collection Analog20.zip
-
AtariMania has a pdf for starters...
-
I've seen quite a few on ebay go for over $100 loose, but I did pay $40 for one that was listed in the wrong category
-
That's all I need is another computer, have like 20 so far I was hoping to have another working tool for the 64 instead...
-
Yep, I pointed that out to the seller, he thought that was normal. But for $15.99 each, I think I should be able to fix that pretty easily
-
Here is Passionately with a few other music demos... RobotDemo01B.ATR
-
I've read all of those pages but one when testing, even typed in the one test program, but that froze too... I saw one comment from a Genie Posting that said that only a 64 with a 5 Pin DIN for the monitor jack would work? There's a guy on eBay that is selling the complete package and listed "As Working". I'll type in the Filtran program and see how that goes... Thanks for the replies, Jay
-
That would be my 2nd guess too, but didn't see that on the demo pages to confirm... I'll check my floppies...
-
Sounds like Dancing Feats?
-
I recently picked up one of these on ebay, but can not get it going. I've downloaded the correct d64 image and copied to a floppy, but after I load "CPM",8 and run, the c64 just freezes... Anyone ever get one of these to work??? Thanks, Jay
Like us on Facebook
Follow us on Twitter
AtariAge on Instagram
Watch us on YouTube
Chat on Discord