Jeffrey Bouchard

Here is the right screenshot...Sorry about that. jzIntv will execute the ROM 'Astrosmash!' with the following command line, based on the current settings: C:\JZINTV\bin\jzintv.exe -e "C:\JZINTV\bin\EXEC.BIN" -g "C:\JZINTV\bin\GROM.BIN" -f0 -z5 --kbdhackfile=C:\JZINTV\hackfile12.cfg --kbdhackfile=C:\JZINTV\hackfile12.cfg "C:\JZINTV\rom\Mattel Electronics\Space Action Network\Astrosmash.rom" I cannot seem to find the output.txt file. Where should I be looking for this information? Thank you. UPCI not showing up.doc

I have attached a screenshot...it is not showing up in my system. Sorry, it will not let me copy it into the reply field. UPCI not showing up.doc

Thank you for all the help.

Buying a new one is my last resort. I hope that something can work.

I just uninstalled all of the USB devices on the computer and restarted it. This allowed Windows to reinstall all of my devices, which worked for everything except the interface. Guess I might be buying a new one.

I'm not quite sure. It was right around the time they came out and my device does have a 2012 date.

In regards to trying a new USB cable, I cannot as it is hardwired into the unit. At least on the newer unit based on the picture that was posted you can change the USB cable.

OK, I unpluged all of my USB devices that I could and changed USB ports for the interface. Sadly, still no luck. I tried it on an old windows 7 laptop and same issue. It doesnt seem to be installing the USB software. If I button mash on the keyboard, yes the rom lights up. By the way, my device has a 2012 date. Thank you for all of the help.

I tried the MTE test cartridge and I will try these suggestions later. Thank you very much.

I followed your instructions and hooked up my flashback controllers to the device using the adapters. I also put this in the advanced section --kbdhackfile=C:\JZINTV\hackfile12.cfg. Unfortunately, I still have had no luck right now. I will try again later. Do you think that Windows 10 might be to blame? Also, in Device Manager, what does the interface show up as? I'm not sure that it is being recognized. Thank you very much.

I have already tried and they do not work. Thank you though.

Thank you very much for the help. I've also been using the console with my LTO mostly and I am looking forward to the Intellivision Amico.

I am running Windows 10. It's not letting me copy my screenshot into the thread. I have the hackfile listed and the joystick boxes are blank.

Just tried using Intellivision 2 Controllers with no luck. The controllers do not function on the website either. I tried to change the USB port with no luck as well as trying the interface in the UP UP position (supposdely Autosense.) Any ideas would be greatly appreciated. Thank you very much.

Hello, I have the emulator set up through the LTO software and it works. Also, I have the Ultimate PC interface. I never upgraded the firmware on my device, however, I have two flashback controllers connected to the interface using the Flashback to INTY 2 adapter cables. However, JZINTV does not recognize the controllers. On the interface the left switch is up and the right switch is down. I have 2 hackfiles to try from the intellivision.us website, however, none of them work with my current configuration. It worked before using INTY 2 controllers. Any help would be greatly appreciated. Thank you very much. I appreciate it. Jeffrey

Just a thought, although its been stated in previous controllers will not work for the system I am just wondering why it would not be possible to work for at least a legacy side if you use a flashback rewiring wire plus a USB adapter Or another DB nine controllers such as intellivision 2 or sears super video arcade?

Good point....that does make sense.

Since there will be games from other systems on the Amico, do you think that it would be possible to include the retro versions as well? I was surprised and delighted to hear that other systems games such as Atari will be included, it would be nice to also have the retro versions of these games if possible.

Would it be safe to say that the touchscreen buttons if you will mimic the Intellivision 2 more so than the original or flashback?

I reread the topic and back in July, there were discussions about a possible cartridge port and two sides the modern and the legacy side. Hopefully, this is still the plan. I am just wondering why none of this was brought up in the reveal or the press release? I think this is the best of both worlds and hopefully will be in the final plans.

Are the original games going to be included for free with the console? I remember hearing yes but there was no mention of them in the keynote or press release. Since there will be newer versions of the classics, not having the originals would seem strange. I am optimistic with this console.

We can hope for one but I like the ideas so far

I realize some games will be included with the console but does that include the original Intellivision games? Previously, they said yes but having no mention of that in the presentation or press release, I thought was strange. Liking what I see so far, however.

I believe this could be good.....I am optimistic with this news. Bring on October 10, 2020!

Will Roms be available with a purchase of the cartridge or separate to be used with a flash cart?