soufian

i dont know how to delete it 😅

oke wil try again .oke its working now but it wont see my sd card ,itf formated fat32 ,can some one share the 3d files for the case thanks

this one ? PlusCartUnified 2021.02.13.zip182.4 kB · 127 downloads

where can i find the correct firmware ?

i think i flashed the wrong firmware ? can i reflash it ?

what files do i need for the sd card does the sd card need to be fat32 ?

iam using this firmware on the blackboard atari-2600-pluscart-master inside is a firmware i dont see a menu system or anything what am i missing ?

iam getting nothing on the screen do i need somekind of extra files on the sd card ?

to late already solderd everything in this is the best i can do where do i find the files for the sd card ?

i messed up 2 boards already damaged traces 🤣 i think iam going to give up the instruction in the video are not clear at all to me on the second card i made a mistake to install the wifi card first i also bought this wifi flasher thing in case i need to flash the wifi module https://www.aliexpress.com/item/32915870451.html?spm=a2g0o.order_list.0.0.7d2918029GgWvF

oh because the guy in the video says you need a usb cable with all the datalines so i thought a otg cable ! he never said anything about connecting those boot 1 or 2 just press the button insert usb cable and it should connect ,wil try out again i flashed it with succes ,installing the pcb i think iam doing something wrong the video is not clear the black board doesnt fit with the sd card board

the mainboard does not want to connect i tried couple of usb cables i had . i think i need a otg cable ??

ok the first one i uploaded was this PlusCartUnified3_2021-07-28 dont remember where i found them than they told me about cutting etc than i found your github ,hope it good now 😁

oke wil tel them link where i got the files from https://github.com/andrew-davie/PlusCart

the last email i got was this Hi Sir or madam, Well got your order with many thanks~ Sorry to bother you, but there is an issue that we want to confirm with you before proceeding. As shown below, there are too many files, could you point out which Gerber file we can use ? <<< !! they are asking about the gerber so i think gerber folder is fine Your early reply will be highly appreciated! Thank you so much!

the folder name is this got it from github PlusCart-main < and inside is this see picture so i tell them the gerber folder ?? oh i see now on github its you

oke and wich files do they need they are asking about a file ?

got a email 2 times /any one can help me !!! Hi Sir or madam, Well got your order with many thanks~ Sorry to bother you, but there is an issue that we want to confirm with you before proceeding. As shown below, there are too many files, could you point out which Gerber file we can use ? Your early reply will be highly appreciated! Thank you so much! second email Hi Sir or madam, Well got your order with many thanks~ Sorry to bother you, but there is an issue that we want to confirm with you before proceeding. As shown below, for the green frame in profile layer, shall we cut it out as slot? If yes, it will cut off the holes inside, is it ok?

thanks its better than nothing ,hope when the wifi dongle arrives it already has the firmware on it 🙏

where can i find the correct firmware for the ESP8266 ESP-01

any one can give me a list of parts to build the sd card version and github files thanks or maybe a combo of sd and wifi cool option is to upload highscore etc 😁

can you give me a list of the parts and the gerber files so i can see what the total is would love to build one my self or try and see first how much it cost 😁

so what are my other options ? any website and or parts list

iam new to the atari,where can i buy the sd card version only or the parts to build it my self thanks

thanks for the tip this mod never worked for me i bought a kit on ebay works now