Atari 2600 H.E.R.O

CD-ROM Image Size < 13MB (Zipped Size) Firmware Size < 1KB (Zipped Size)

CD-ROM Image Size < 13MB (Zipped Size) Firmware Size < 1KB (Zipped Size)

Don't Change ICs. Don't Turn ON Console Again Before Resolving The Problem !!! The Black Vertical Video Pattern In Picture1 is Same As Picture2 And Your Atari 2600 is working properly. Console Generates Sound and Video Signals. You have Problem In Address Bus and/or Data Line Due To Cold Solder and/or Break Damage in connections. Resolve problem With Checking The : Adapter Output : +9v-+10v (IF No, Then Change Adapter) Regulator Output : +4.9 - 5.1v (IF No, Then Change 7805 and if is possible, Replace Capacitor, Also) Check The Pins Connections To Board (6507,TIA,RIOT) , Important ! Check and Trace PCB Connections To Find Any Damages (It May Done While Cleaning The Board !) , Important ! Check Soldering Nodes (Don't Forget Connections of Cartridge Slot To PCB/Board). Good Luck.

"OSx16 Jmice Adapter Device Driver" Installation : Connect Adapter To Serial Port Boot System With OSx16 Version 6.22 Beta Release Revision 6.22.02 Type : OSxJmice (Upper/Lower Case Allowed) To Run "OSx16 Game Commander" : Type : OSxGC (Upper/Lower Case Allowed) Also;You Can Use Atari CX40 Joystick (And/OR Compatible) In Skyroads, Skyroads (XMAS Special), Wolf3d DOS Games Via "OSx16 Jmice Adapter Device". + 340 Atari 2600 (Play All With "OSx16 Jmice Adapter" And Atari Joystick, Just Now) + 20 DOS + 5 NES + 2 SEGA + 3 C<64 Games. Best Choice For Old and New PCs & Laptops Without HDD, FDD, Sound Card, Huge RAM, ... For Simulation The Atari 2600, And Using Its Original Joystick. Adapter Picture In : http://atariage.com/forums/topic/246470-diy-osx16-joystick-mice-adapter-osxjmice/ CD-ROM ISO FILE : http://1drv.ms/1iE3ci3

After "OSx16 Multi Bankswitch Board": http://atariage.com/forums/topic/242873-diy-multi-bs-with-atmega8-for-atari-2600/ Just "OSx16 Joystick-Mice Adapter." With This Adapter, Connect Atari Standard Joystick To PC/LAPTOP. Connect Adapter To Serial RS-2323 Port (COM PORT) And Play Atari Games Under OSx16 Operating System With Joystick. With Only : 1xMCU (Atmega8A) 1xTransistor 5xResistor 1xCapacitor 3xDiode 1xDB-9 - Male 1xDB-9 - Female Firmware and "OSx16 Version 6.22 Beta CD-ROM" (Schematic and Values and Device Driver are In CD-ROM) Address : http://1drv.ms/1iE3ci3

Thank You and Good Luck

NOTICE : " YOU NEED NOT TO PATCH ANYTHING". Upgrade Atari2600 and Replace Any Simple/F8/F6 ROM IN E2PROM, BUT ! KEEP SEQUENCE (IMPORTANT). And Again : FOR and IN "OSx16-A2600 BOARD", " YOU NEED NOT TO PATCH ANYTHING" !!!! KEEP SEQUENCE AND COUNT OF NORMAL/F8/F6 : (2*2K/Normal/No-BS)+(19*4K/Normal/No-BS)+(4*8K/F8)+(1*16K/F6) OR (20*4K/Normal/No-BS)+(4*8K/F8)+(1*16K/F6) YOU CAN REMOVE ANY ROM FROM LIST AND REPLACE OTHER ROM WITH SAME SIZE/SWITCHING, 1- DO SOME WIRING, SOLDERING AND MAKE BOARD. 2- Write HEX FILE TO ATMEGA8A 3- Write ROMS-PACK TO E2PROM 4- Check Connections Carefully (Important !) DONE! ROMS IN EEPROM ARE: 2K- Bowling 2K- Fishing Derby 4K- Air Raiders 4K- Berzerk 4K- Bobby geht nach Hause 4K- Challenge 4K- Chopper Command 4K- Enduro 4K- Fire Fighter 4K- Frogger 4K- Keystone Kapers 4K- King Arthur 4K- Lock 'N' Chase 4K- Pac-Man 4K- Pitfall 4K- River Raid 4K- Sea Hawk 4K- Seaquest 4K- See Saw 4K- Spider-Man 4K- Sub Scan 8K- Battlezone 8K- H.E.R.O. 8K- Pole Position 8K- Private Eye 16K- Commando 1) Download OSx16 Version 6.22 Beta Release Revision 6.22.01 CD-ROM 2) Boot Your System With OSx16 BOOT-CD (OR Use VMware/VM BOX/...) 3) Type A2600DIY.BAT (SEE PICTURES AND READ MANUAL) OR TYPE : "C64" For Commodore 64, "Atari" For Atari2600, "NES" For Nintendo, "SEGA" For Sega, AND/OR Goto "C:\GAMES" Directory For DOS Abandoned Games (Wolf3d,Prince of Persia, Wings of Fury, ...), Please. * Schematic #2/2 : IC = F29C51002T SyncMOS (Or Any 256KB E2PROM) ** Common = A2600 System Address Bus

Well thank you for Quest ! Too. "Some Tricks" + "Intelligence" - "Time" = "Interrogation" By The Way, ...

Dear Sir, "OSx16-C64 Method", "OSx16-A2600 BOARD" Articles/Projects and OSx16 Programs ("Marbles and Bars" Game, OSxView, ...) are The PARTS OF "OSx16 Version 6.22 Beta Release Revision 6.22.01 Operating System BOOT-CD, and DISTRIBUTED BY "OSx16 Operating System TEAM". BOOT-CD Exceptions : Abandoned Games and Shareware/Free Emulators ARE FOR Fast Playing With SOME C64/ATARI/SEGA/NES GAMES. Type In Command Line : "C64" For Commodore 64, "Atari" For Atari2600, "NES" For Nintendo, "SEGA" For Sega, And Goto "C:\GAMES" Directory For DOS Abandoned Games (Wolf3d,Prince of Persia, Wings of Fury, ...), Please. Atari's Friends (ATARI Lovers!) Looks For (And Have Nostalgia With) Some Specified Games, Only! Some'times (Many Times!) One OR TWO GAME(S) IS/ARE Enough, Even Without VCS! (Answer For (Why "OSx16 BOOT-CD"?)) And, For Somebodies That Have Console(s), Inserting A Small Board In The System, Same As "OSx16-A2600 BOARD", Is Enough, Also. At The End, Projects In "http://atariage.com/forums/topic/56073-cheap-2k4k-x-in-1-menu-driven-multicart-for-atari-2600/page-3", They Are All Perfect (Good Luck). Thank You

Yes, BS is bankswitching. No, ROMs Are Not inside the ATmega. ROMS ARE IN E2PROM (see pictures, ON-BOARD ROM REPLACED WITH E2PROM). WHY DIRECT SOLDER? VCS CARTRIDGE-SLOT HAS NOT CHANGE/SELECT-LINE. VCS CARTRIDGE-SLOT HAS NOT RESET-LINE. HAVE YOU CARTRIDGE WITH NO-BS/F8-BS/F6-BS (BANKSWITHCING), ALL IN ONE ? *\ SEE GAMES IN THE GAMES LIST, H.E.R.O/... (F6) COMMANDO (F8) RIVER RAID/ ... (NO BS) *\ WITH "OSx16-A2600 BOARD" TURN ON ATARI, CHANGE/SELECT NORMAL or F8/F6 CODED GAMES WITH SELECT-SWITCH OF ATARI, NORMALY ! * IF YOU HAVE NOT VCS WITH BUILT-IN ROMS, YOU CAN INSERT E2PROM ON "OSx16-A2600 BOARD".

OUYA : https://www.ouya.tv/(GAMES, PRICE, ...) Simulates ATARI, SEGA, C64, ...

See :OSx16-BOOT-CD INCLUDES ATARI 2600 GAMES AND EMULATOR I Think You Are Looking For It ! IF You Want, I Will Add Your Fav Atari2600 ROM(s) To BOOT-CD. After Boot Simply Type : atari

IF You Have C64 (Commodore 64) Also, You Will Find "OSx16-C64 Method" In http://1drv.ms/1iE3ci3 "OSx16-C64 Method" Will Answer You About "How To Make C64 Tape Cassette For C2N, Fast And Easy!" + Detail+Firmware+Schematic, (DIY). Good Luck

IF You Have C64 (Commodore 64) Also, You Will Find "OSx16-C64 Method" In http://1drv.ms/1iE3ci3 "OSx16-C64 Method" Will Answer You About "How To Make C64 Tape Cassette For C2N, Fast And Easy!" + Detail+Firmware+Schematic, (DIY Again !) Enjoy and Good Luck

For Unique "OSx16-Atari2600 BOARD" and How to Update Atari 2600 With "OSx16-Atari2600 BOARD" (Multi-Game + Multi-Bankswitching) Refer To Hardware > (DIY) Multi-BS With ATmega8 For Atari 2600

"OSx16-Atari2600 BOARD" Update Atari 2600 With "OSx16-Atari2600 BOARD" (Multi-Game + Multi-Bankswitching) Detail, Firmware, Schematic : http://1drv.ms/1iE3ci3 Enjoy and Good Luck

Want you make it ? If You want, I will insert schem and firm, or link (2 days after).

Unique Method For BS Atmega8A is a good choice. As you see in pictures,With Some Wiring and Some Cheap Semiconductors, Only. In Picture You See Atari 2600jr with built-in Games that repaired. ROMS IN EEPROM ARE: 2K- Bowling 2K- Fishing Derby 4K- Air Raiders 4K- Berzerk 4K- Bobby geht nach Hause 4K- Challenge 4K- Chopper Command 4K- Enduro 4K- Fire Fighter 4K- Frogger 4K- Keystone Kapers 4K- King Arthur 4K- Lock 'N' Chase 4K- Pac-Man 4K- Pitfall 4K- River Raid 4K- Sea Hawk 4K- Seaquest 4K- See Saw 4K- Spider-Man 4K- Sub Scan 8K- Battlezone 8K- H.E.R.O. 8K- Pole Position 8K- Private Eye 16K- Commando You Can Find And Play With Those Games In OSx16 Version 6.22 BOOT-CD, ALSO.

OSx16 Version 6.22 Beta Release BOOT CD INCLUDES : OSx16 Marbles and Bars Game DOS OLD Games (Wolf3d,Prince Of Persia, Wings of Fury, Paranoid, ...) ATARI 2600 Games (River Raid, Pitfall, H.E.R.O, ...) NES (Nintendo) Games (Bubble Bubble, Bomber Man, ...) SEGA Games (Urban , ...) Home Page : https://archive.org/details/@osx16_operating_system DOWNLOAD LINK : https://archive.org/download/OSx16Version6.22BetaRelease.7z/OSx16%20Version%206.22%20Beta%20Release.7z