fabrizio

Thanks, I saw it on your site. I would like to be the programmer you did, but with basic, using the cortex, do you think it's possible? Because BASE 040H+(2*18) from the basic manual I can't understand 2*18 well..

I brought the tm990/189 to some events.. https://www.facele.eu/index.php/ti-museum/tm990-189

Hi @Stuart, where can I read the various commands to read and write the 9901 via Basic cortex? I see from some examples on your site that there are CRU commands, similar to the Basic of the tm990/189, is it the same? Can I use them with another basic?

interesting, what I would like to do is a simple card that can be driven with TI exended basic, like the first photo you inserted..interesting !!!! news ?

interesting !!!! news ?

bellisisima IDEA ! there is already usdt, we could do USDTI

Jedimatt, I don't know what to tell you, as soon as the USB cable arrives I'll try this. Thank you very much

excellent, but it takes too long to print, is it possible to have the source file to modify? Thank you

TI Logo

I also got a programming cable, but was intrigued by programming via rp0. Also because I want to try to test the 95144 before using them with the FG99.

@RickyDean ciao, it finally works 😍, I was able to read a working cpld, as both the one found on the Jetimatt site (tipi_cpld) and on github (tipi_cpld-v3), don't work for me with xcsprog. I read the cpld from a working pcb, with the command sudo /home/tipi/xc3sprog/build/xc3sprog -v -c sysfsgpio_creator -p 0 tipi_top_read.jed:R , then I used the file to program the pcb assembled by me. I attach the file.. here you will find information for the programmer: https://xc3sprog.sourceforge.net/manpage.php tipi_top_read_ori.jed

I can't change it Jedimatt

With these cplds I had various problems programming them with the Finalgrom99, of a reel of 10 only 2 worked, that's why I purchased the socket to test them...

hi, I finally programmed the cpld with the tipi_cpld.zip version, the programming information corresponds to the document. I tried with the tipi_cpld.zip-V3 version from the Jedimatt website, it doesn't download, then I tried from gitHub, I tried to program the cpld but it gives me a "segment error" while if I try again to use the tipi_cpld.zip version it works. Well I put the RAM, eprom, sd, after a few seconds of loading from the call tipi command the Memory Full error comes out with various characters on the screen.

it works well I tried various cplds that I couldn't program directly on the FG99.

cant find the package. well, finally now we can connect the 95144. what have I done so far donwoloaded img https://jedimatt42.com/downloads( tipi-sdimage-buster-2.37.zip ) wget https://jedimatt42.com/downloads/xc3sprog_buster.zip unzip xc3sprog_buster.zip sudo apt install libftdi1 wget https://www.jedimatt42.com/downloads/tipi_cpld.zip unzip tipi_cpld.zip sudo /home/tipi/xc3sprog/build/xc3sprog -c sysfsgpio_creator chain not found Let's try/program this Chinese 95144 chip shi........t. see you soon and thank you

after installing libftd1 command sudo /home/tipi/xc3sprog/build/xc3sprog -c sysfsgpio_creator answer /home/tipi/xc3sprog/build/xc3sprog: error while loading shared libraries: libwiringPiDev.so: cannot open shared object file: No such file or directory

Command -> sudo /home/tipi/xc3sprog/build/xc3sprog -c sysfsgpio_creator Answer -> /home/tipi/xc3sprog/build/xc3sprog: error while loading shared libraries: libftdi.so.1: cannot open shared object file: No such file or directory It seems that this library is missing, or am I wrong?

here is the link, I apologize for searching the forum and not finding JediMatt's answer before.. https://github.com/jedimatt42/tipi/wiki/CPLD-Programming-With-PI

Italian coffe paid ! 😂

thanks for the reply, I'm doing some tests starting from an RP0 W, when I give the first command curl https://apt.matrix.one/doc/apt-key.gpg I get the error curl: (7) Failed to connect to apt.matrix.one port 443: Connection refused the site is not reachable

Let's hope....😍

Hi everyone, we are trying to program the cpld with rP0 but we too have this error, are there any updates? thanks to those who reply

Hi everyone, they brought me an FG99 with the RAM (as6c8008-55), apparently it seemed to work until we tried the (TI extended basic), the FG99 blocked, I replaced the RAM with (cy62158) no problem. Now I don't have an AS6c8008 to do other tests, but I would like someone who has the fg99 with this ram to do some tests with the TI extende basic. THANK YOU

Here's what I had to adapt to test the cplds. (they send us shit@) Sorry Ralph if I cannibalized the PCB!!