productof76

Ok, I see… I never tried the reset whith a loaded game in GD. Yes, that is working fine. @42bs Thanks for help But doing a reset in the GD menu leads to the red freeze. I was hoping that the reset could trigger a whole new boot up for the GD so that the menu shows up again. It seems that is not possible? I knew about the lack of an IGR… thought that was a different thing but obviously it is the same issue… OK my fault I should have known better.

Ok, reset is working on B33 but the result is the same: It works well with regular games but with GD it always freezes with the red screen. 😔

@42bs …and you trigger it via ground? …just to get sure…

Tested on the cartport pins I’ve mentioned above… no action! Tested with Wolfenstein 3D first (not with the GD). On 18B to GND glitches appear and the game broke down on 33B to GND there is nothing happening. @42bs could you specify? Maybe @SainT or anybody else could give me some advice why the reset to pin 13/U9 work with any game but doesn‘t work with the GD? 😊

Ok, in the tutorials I found so far pin13 on U9 is always recommended and it works pretty well except for the GD. Can you point out for me on which pin exactly on the cart port you grab the reset? Edit: Found this schematics. Seems it must be on 18B or 33B can you clarify for me? http://www.jagware.org/jag_uploads/dev/glenn_bruner_atarishowroom/cart_sch.htm

@SainT I have installed a reset button on my Jaguar. It is connected to Pin 13 on IC U9 and resets to GND. It works fine with every game I‘ve tested so far. But with the GD it doesn‘t work. The console resets but then the Jag start screen freezes red everytime. Is this a known issue? Is there a solution to carry out the reset as it should be? Thank you!

In Germany a beer advertisment says: Bitte ein Bit! I always order „Bitte 8 bit!“ in the Pub. That‘s how I do the math.?

What did you expect? It‘s the Jag! You better Do the Math!?

dragonbox is a german store and does not offer preorder until stock is in sight.

83 in front of me... Maybe some for your european fellows? ?

Take a look at that: A way more aesthetic solution, at least from the outside.? @TheNameOfTheGame Arduino is of course the best solution?

I call that mutilation ?

This is a pity. Is the jaguar really so stubborn? ? This would be a really great and useful feature. Well I buy it anyway..?

Hey SainT, please please please implement a controller button combination to get back to the Jag GD menu without switching the jaguar off and on. That would make the Jag GD PERFECT! ? I‘ve seen the review on DB.. It’s the only thing that‘s missing to make it the perfect product.

For Germany, it is not possible to declare a lower value. You have to show the paypal invoice at customs office.

@phoenixdownita The countries of the European Union (Germany, France, Spain... and so on) will charge taxes on british products after brexit. ...when Britain is no longer a member of the European Union. So in my case I eventually would have to pay import duties in case of hard brexit. For US buyers it will make no difference if there is a brexit or a hard brexit.

Hopefully before an eventually hard brexit..?

188 ... and I thought I was fast!? ?

@SainT I think the price is fair regarding to all the work that you‘ve spent in the last years on the jag sd. I’ve seen the manual you have posted in your news section and I would like to ask about the possibility to get back from a game into the jag-sd menu by using a key combination on the controller. We had this issue already in this thread but I like to ask if you have implemented this feature with the final release or if it‘s coming with a future release. In the manual I can‘t find anything about it.

Thanks for your reply SainT. I totally understand your decision, your a perfectonist and so are your products. I like that!? ...and I‘m confident that you‘ll bring us (perfect) CD support with a firmware update in the (near) future?

I thought the problems with running CD games were already solved by SainT. What is the reason (technically) why this feature will not be realized with the initial release?

...and who has the second? ?

I would love to see a cartridge with all the great Atari ST / STE demos someday. All that awesome stuff from TCB, TLB, TEX, etc. on a Jag cart

no they dont research this thread or read this on SainTs website: https://www.retrohq.co.uk/are-flash-carts-safe

OK, a little research, firmware update and its working. No need for that PCB, man Im happy