Jump to content
Have You Played Atari Today?
2600|5200|7800|Lynx|Jaguar|Forums|Store

Polish.Gasoline

Members
 View Profile  See their activity

  • Posts

    89

  • Joined

  • Last visited

 Content Type 

Everything posted by Polish.Gasoline

  1. Polish.Gasoline
    Yup. It is. Lol. Thanks for the reassurance.
  2. Polish.Gasoline
    Hi, I just did a cap kit on jr. and the only thing that ain't working is the led. It wasn't working before either. I put a 12 volt from china on there and it ain't lighting up. I tested the led with a diode function on the tester and it read .81. I took a resistance test and I got OL. It's in reverse? Lol? Thanks.
  3. Polish.Gasoline
    Misread. The capacitor I know needs to be fixed but what exactly is that little piece? I was assuming it was a surface capacitor. Where can I get one? I don't have a schematic. I'm learning as I go.
  4. Polish.Gasoline
    Thanks. I just don't know what exactly which capacitor to buy. I can't find a schematic online.
  5. Polish.Gasoline
    I recently bought a guncon 2 and while replacing a faulty capacitor. I knicked a surface capacitor. It is labeled S9. I am extremely bummed about it. Any help will be awesome, thanks.
  6. Polish.Gasoline
    Hi again, I just received the led ribbon connector in the mail and I tried to see if I would need to remove the part where it disconnects and seems like a snug fit. Now I go on to my questions: Where on the diagram is all the connections on the logic board for the ribbon cable are? In the second picture if the two circled are supposed to have continuity with each other? Thanks!
  7. Polish.Gasoline
    I'm quite confident it is the ribbon connector. It is quite in bad shape. I've asked console5 if there was a replacement when it was working and he had said no, not yet. Which is quite some time ago. I'm kind of pissed that when I fix something another problem appears. Oh well. Is there a way to fix it? I could hardwire it. Did I answer my own question? Lol. I do not plan on taking it apart again I had fixed and cleaned everything, replaced the capacitors. So yeah. It's just this ribbon connector. It was working fine till I had placed the shielding on.
  8. Polish.Gasoline
    It's most definately not dirty. Could it be the ribbon cable? I cleaned it it and it did not solve the black screen issue. I cleaned the game as well. The ribbon cable has continuity so I'm really stuck. I cleaned it with sandpaper and a old t shirt with a credit card also a eraser over a cartridge. It did nothing. The screen doesn't even flicker when I hit reset.
  9. Polish.Gasoline
    Hi again, I have some time the next couple days to tinker with this. It was working fine with the phono replacement until I put the top shielding on. I also had to fidget with the phono plug for it to work. It changed from a black screen to a title screen. It no longer does that. I tried resoldering the resistor on the phono plug. Left the shielding off the screen was black. Did I f up something by putting the sheilding on? Thanks in advance for input Edit: The black spot is from previous transistors that has been replaced, quite some time ago.
  10. Polish.Gasoline
    Another thing the ribbon cable is junk on the INTy. I want to replace it. What would it be listed as? If anyone knows let me know. Edit: It works fine. It just doesn't look all that well.
  11. Polish.Gasoline
    Update. I was taking apart the intellivision and took off the toasted rf jack. I have one problem. The hole is too small. On to my question. If I desolder the bottom off will it take off the middle? There is the top, the middle and the bottom (Which is on the board.) I want to know before proceeding so I can drill a bigger hole. It would give me some relief I didn't leave some metal shavings when I am done. Btw when I'll test in summer I meant with a bigger stash of games.
  12. Polish.Gasoline
    Unfortunately, no not at this time. I usually store my inty at a cottage and the games I listed are the only ones I have on me at this time. However it worked fine until the q tip situation.? I have astrosmash and snafu. I will have to wait till summer.
  13. Polish.Gasoline
    Which website would that be exactly? I'm unfamiliar. It's been ordered. Thanks a lot! It's generally clean... Ok I have a confession. While cleaning the jack with q tip, it had became dislodged. To make the picture better. So I was not sure what to do. Unfortunately I do not have Astrosmash at the time but I do baseball and the first d and d. It is crystal clear.
  14. Polish.Gasoline
    Oh yeah. I've done some soldering before. I do not have one like that. It's a soldering station.
  15. Polish.Gasoline
    2609.
  16. Polish.Gasoline
    Better question: Where can I get one of these? It appears to be soldered on. Call me an idiot but there must be somewhere I can buy this part. There is nothing else wrong with this intellivision.
  17. Polish.Gasoline
    Turns out that was ground. So it didn't matter. The picture was out of focus so it looked bad. What ever lol.
  18. Polish.Gasoline
    Is it possible to fasten this female into shielding like it originally was? It seems to have slipped out everytime I put in a coaxial. Otherwise it is fine. I have no clue how it originally was.
  19. Polish.Gasoline
    What is an example of this solder mask I can buy?
  20. Polish.Gasoline
    It isn't normal. There is continuity between the two. Is there any way to cover it up?
  21. Polish.Gasoline
    They are touching. I'm afraid to put power to it. It might short.
  22. Polish.Gasoline
    I have 2609 intellivision. While doing a recap I slightly scraped a trace and doing a continuity test it conducts to the cap. I haven't powered it on like this but I would like to know how to fix this. Thanks in advance.
  23. Polish.Gasoline
    The guy at console 5 says it's quite a strange problem to have on the console. I'm ordering a cap kit anyways with the other transistors. My system is fine other than that. It just a little burnt on the chip I just wanted to replace it so it wouldn't get worse. Like someone already said when it gets burnt it gets conductive and that's what I am afraid of. I don't want to do surgery on a board and Frankenstein the thing if I don't have to. I don't know if the console got left on too long if that had caused it don't know but it works without a problem when I play it. I hacked a cord on one of the controllers cause it was giving me some input problems when tugged. It works fine now. After this I'll leave it alone.
  24. Polish.Gasoline
    Maybe some are left on for too long is my guess.
  25. Polish.Gasoline
    How does this happen? Where can i buy one? Appears I caught it in time. There is no major damage.
AtariAge
Forums
Store
General
Follow AtariAge

Copyright ©1998-2023 AtariAge

×
×
  • Create New...