Jump to content
Have You Played Atari Today?
2600|5200|7800|Lynx|Jaguar|Forums|Store

Polish.Gasoline

Members
 View Profile  See their activity

  • Posts

    89

  • Joined

  • Last visited

 Content Type 

Everything posted by Polish.Gasoline

  1. Polish.Gasoline
    Just wondering if these parts commonly go on a intv model 1. Mine works but the board is black. It's the two black parts. Just want to know in case I have to order parts in the future.
  2. Polish.Gasoline
    This was an image of slowcoders not mine. Mine landed into a sewer. I'll send you a pm.
  3. Polish.Gasoline
    I'll give you my address.
  4. Polish.Gasoline
    Just ship it through regular mail. I can pay you back for w/e you want. I believe first class or something like that. I don't need it that badly lol. My Atari skills can wait.
  5. Polish.Gasoline
    I need a b and w switch. So a toggle. Pm the price and shipping.
  6. Polish.Gasoline
    I could use 5. I'll pm you.
  7. Polish.Gasoline
    I need the clip that makes the connection on the base of the switch. Like in the picture. The more the better.
  8. Polish.Gasoline
    This is what I am looking for.
  9. Polish.Gasoline
    Hi, I'm looking for a small part. It goes under the switch and goes on top of the base of the switch for a light sixer. If I could get one of those I would be in business. I tried to order parts from Bardley but I must have pissed him off.
  10. Polish.Gasoline
    Don't worry I won't blame anyone if anything goes wrong.?
  11. Polish.Gasoline
    Afaik. I bent the pins upward further than i had previously to fix it and rearranging the overlay a lot. After all that I found it actually worked better with it screwed in after a lot of hassle. I need an opinion. How abouts would you suggest I take the rf shield off? I orginally was going to clean the board with rubbing alcohol since I had found the reset went working due to spilt soda on the console. There's contact with the switch now but I'm just afraid of corrosion in the future. I heard a butane torch would do it. I'm just looking for advice. Thanks so much guys.
  12. Polish.Gasoline
    Hi, I fixed the controller that wasn't supposed to be the problem. Now I'm trying to fix the other I replaced. Continuity through the board to the controller is good. The block is the right order. Here's my problem. I got it to work after clamping it a little harder with pliers but it still has problems. There might be a delay in the press or it may not register after a certain point. It works when it's like this not screwed in. When it is screwed in, it doesn't even register. I cleaned the back of the connection on the plastic and it was surprisingly quite dirty but that didn't fix the problem. Any suggestions? Edit: I had ended up making it work some how. Thanks everyone.
  13. Polish.Gasoline
    The problem with the block was I broke it myself. I'd rather not explain. The reason why the other controller isn't working is because I opened it. Green is at the bottom, blue, yellow, black tan, grey , pink, white and brown at the top. I'm pretty sure it is right. Anyways I'll work on this on monday. Take care.
  14. Polish.Gasoline
    Dumb question:What if I did put it backwards inside the console would that ruin it?
  15. Polish.Gasoline
    Well there was no stink and it did light up. I guess that is success.
  16. Polish.Gasoline
    Ok. I took apart the intellivision and cleaned it. Now none of the controllers are really functioning. All I want to do is remedy. I had put in a new leaf connector and it isn't working either. How do you suggest I test out and fix the problem? I'm an avid learner lol.
  17. Polish.Gasoline
    Pmed you.
  18. Polish.Gasoline
    Found someone that can send me a couple of those leaf switches on facebook. Facebook is actually useful for a change. To anyone looking for parts for an intellivision go to facebook.
  19. Polish.Gasoline
    Just installed it and it works like a charm.
  20. Polish.Gasoline
    Yes. If that would be possible I will pay. If there is more than one I'll take it as well.
  21. Polish.Gasoline
    I just need where the wires touch the metal part inside the controller to function. I tried pressing them in and then i soldered them in a hurry and made a mess. It's been over heated and it's trash. I am 100% sure it is the controller that isn't making the connection since the wires were frayed at that end. When the controller is held and tilted it disconnects. I can see if it is pulled it would be the console but its when it is stretched and bent. It's the brown one with a gold sticker.
  22. Polish.Gasoline
    It was yanked too far on the cord coming from the controller so I redid the wires. I actually see what I did and all I need is an actually piece of the controller if anyone has one and I'll redo the soldering. I just was in a rush and that wasn't a good thing.
  23. Polish.Gasoline
    Hi there, I am trying to get a controller to work properly. I cut the cord and attempted to solder the wires on to the connector and being inexperienced I didn't do a very good job. Any way to fix this problem any easier?
  24. Polish.Gasoline
    It's been ordered. Thank you very much.
  25. Polish.Gasoline
    No it was just the pins 4 and 6 going into the console were giving me trouble. I used the continuity tester (which I should have already known but, I'm new at this), it was player 2s pins that were not working. So that's that. I'm going to get some heat shrink and superglue the right size and shrink it on. Thanks for all the assistance guys. You guys have been nothing less than helpful.
AtariAge
Forums
Store
General
Follow AtariAge

Copyright ©1998-2023 AtariAge

×
×
  • Create New...