Fierodoug5

good to know, thanks! I just turn the volume down

did not know that! Yup, it worked, connected to BBS Express!!! Thanx, new to this, my parents would not buy me a atari back in the day Is the annoying high pitch beep the whole time I am using bobterm normal?

that seems to have helped(removed remote port). Now I get Connect ATA No Carrier

i removed the remote port using the ATDT ip port dialing string

Yeah, bobterm 1.23 is the one for emulators, I'm using 1.22. Any BBS i try to connect to just shows NO CARRIER. Changing Baud speed made no difference

That would be great, thanx!

I am trying to get my setup working to get on a BBS, and having no luck(little over my head and need help) Here is my setup Stock 800XL, atari 850 with CX87 cable in port R1, 25 pin to the UDS-10. Ethernet cable from the UDS-10 to a Xfinity modem/router BobTerm 1.22 set to full duplex, ASCII, 9600 Here is my UDS-10 config. *** basic parameters Hardware: Ethernet Autodetect IP addr - 0.0.0.0/DHCP/BOOTP/AutoIP, gateway 10.0.0.1,netmask 255.255.255.0 DHCP device name : not set *** Security SNMP is enabled SNMP Community Name: public Telnet Setup is enabled TFTP Download is enabled Port 77FEh is enabled Web Server is enabled ECHO is disabled Enhanced Password is disabled *** Channel 1 Baudrate 9600, I/F Mode 4C, Flow 00 Port 10001 Connect Mode : D6 Auto increment source port disabled Remote IP Adr: --- none ---, Port 10001 Disconn Mode : 80 Flush Mode : 00 *** Expert TCP Keepalive : disabled ARP cache timeout: 600s Monitor Mode @ bootup : enabled HTTP Port Number : 80 I have the UDS-10 set to DHCP in the router, I can ping it fine from my PC, and I can access the device installer from my PC. When I load bobterm 1.22, I get the load 2sec beep for the 850 driver, but then I have just a constant high pitch beep that changes pitch depending on the baud rate When I try to "dial" out in terminal mode, I get a "NO CARRIER" I am kinda stuck at this point so any help would be great! Thanx Doug NJ

I made this in tinkercad and printed on my Ender3.

Gunstar, i saw those, He does not list any for the Japan unit

Is there one small enough for the counter belt in those sets?

Looking to purchase new Drive and counter belts for a 1010 Cassette Drive, Japan Model(orange sticker). I live in the US. Any leads would be helpful, want to make sure I get the right ones. The old one is a square belt(whats left of it). Thanx Doug

Thanx for the awesome STL files for this cart Printer- Ender 3 Amazon Basics PLA Translucent Clear Black

Awesome, got them that way....Thanx Doug

yup, they look good in the integrated viewer, but I have no download button on Front and back, only on the logo file

I think so, I was able to get the logo file and open it in Cura, but not the front and back files

Anyone have the STL files for the front and back of this cart? Only the logo STL fiel was available on the github site. Thanx

Got mine, installed in just a few minutes. So far I find them too sensitive. Guess it will take some time for me to get used to it.

Ordered one. Cant wait to try it out!