Nolium
-
Posts
79 -
Joined
-
Last visited
Content Type
Profiles
Forums
Blogs
Gallery
Events
Store
Community Map
Posts posted by Nolium
-
-
On 1/27/2022 at 10:25 PM, scorpio_ny said:
Hi @Nolium,
Very nice work! I recently completed my custom built C64 using a sixty clone board and I also used the same video and sound upgrade. What I did differently is that I used a SIDFx module and used the secondary chip for the ARM2SID. My question to you is that the ARM2SID has the option of simulating 3 SID chips. In my setup, I have been trying to get it to work but I have not been successful. Are you able to enable it and successfully play SID files that use 3 SID chips?
Yes, I have 3SID enabled.
-
Had to increase the RF hole a bit and drilled a hole for stereo jack. Apart from removing RF shield and modulator a very straightforward install. The picture and sound are amazing now.
-
2
-
-
Just a heads up. My Another World order # 421 was just posted to me, Slovenia EU.
-
1
-
-
1 hour ago, Nolium said:
VBXE experts, an install question.
My 65XE board revision C1 is a bit different than the one in manual. Can someone confirm my assumption? On schematic I have marked two connections that needs to be severed, that is, I need to remove L34 and R18.
schematic
and image of my board
Everything works OK. I removed L34 and R18 and connected VBXE.
-
VBXE experts, an install question.
My 65XE board revision C1 is a bit different than the one in manual. Can someone confirm my assumption? On schematic I have marked two connections that needs to be severed, that is, I need to remove L34 and R18.
schematic
and image of my board
-
If I disable SIO driver in U1MB, fujinet is reckognized.
-
On 12/26/2021 at 9:44 PM, bocianu said:
Ok, if you registered on HSC website, now you have to run HSC_conf from here:
https://fujinet.pl/tnfs/HiScoreCafe/
And provide you credentials in this app. (you must have SD card inserted in your fujinet)
Then connection token will be stored on your Fujinet device.
Later on, when you will start the game (from the folder above) you will get recognized and your hiscore will be sent.
I hope
regards!
I get.
FujiNet: not found
FujiNet version is 0.5.f8cc4292 2022-01-03 23:24:24
Machine is 130XE with U1MB, Pokeymax2 and Sophia2
-
10 hours ago, reifsnyderb said:
Looking for card edge connectors. They are horribly expensive. I wouldn't be surprised if the card edge connectors cost $50 per board. ?
Edit: They can gotten cheaply at Aliexpress.....unfortunately. ($7.22 for 5 where Mouser wants almost $10 each.)
Perhaps this will help
https://www.aliexpress.com/item/4000490392119.html?spm=a2g0o.cart.0.0.1bca3c00X38ndu&mp=1
-
2 hours ago, flashjazzcat said:
Thanks - exactly what was needed.
Fixed:
s3loader_0.47_061221.zip 33.18 kB · 4 downloads
All Megacart sizes appeared broken; fixes for anything but 128K are untested but should work. This one also includes a fix for plain 8K ROMs.
Works like a charm now, thanks!
-
2
-
-
1 hour ago, Wrathchild said:
For games that use their own SIO routines you will have to source a patched/cracked version.
For the Lucas Arts' titles you can use cartridge based versions, e.g. here. Though you are best of loading these into Altirra first and then saving as a 'car' file to assist the SIDE3 cart by stating the mapper to use.
OK, just tested Eidolon, Koronis Rift and Gauntlet with Side3. Maxflash works great but Megacart does not. Like you suggested, I have loaded ROMs in Altirra and then exported them as CAR.
-
10 minutes ago, Wrathchild said:
For games that use their own SIO routines you will have to source a patched/cracked version.
For the Lucas Arts' titles you can use cartridge based versions, e.g. here. Though you are best of loading these into Altirra first and then saving as a 'car' file to assist the SIDE3 cart by stating the mapper to use.
Awesome, thanks!
-
Lately I experience problem with U1MB/Side3 on my 130XE. Lucas Arts games (The Eidolon, Koronis Rift) loads Lucas Arts intro and then they are stuck at that point. Same ATR's loads from SIO without problem.
Side3 version 0.44 and U1MB version 4.05 (7.7.2021) plugin SOS3P2. Besides Lucas Arts game also many others won't load but are stuck at intro.
I have already swapped 74LS08 with 74F08 with no change.
-
I've received today d-pad and thumbstick. Testing both at the moment on two controllers and they both work like a charm. They are both vastly superior from the original d-pad. They are really great and I can't recommend them enough.
-
1
-
1
-
-
Very interested. Already signed up on your page.
-
For Mitsumi XE keyboard, I have this type on my 130XE and 65XE. So your keyboard is not made by Mitsumi?
-
I would buy 2 of each, if shipping to EU is possible.
-
Turned out it was a bug in webstore. Problem solved.
-
They don't ship to Slovenia in EU, so looking for some other option.
-
Atari 800XL stock + 1050 floppy
Atari 65XE stock
Atari 130XE U1MB + Sophia2
-
Tested them today and they work great. Thanks again @Simius!
-
Great, ordered and we will tested it out. Thanks!
-
26 minutes ago, Simius said:
Thanks! Amiga have same key posts?
-
I'm looking for 10 Atari XE (Mitsumi keyboard) key posts. Anyone in EU willing to sell them to me?
-
I would like to preorder one for XL/XE computer please.
Like us on Facebook
Follow us on Twitter
AtariAge on Instagram
Watch us on YouTube
Chat on Discord
TV-MULTI-SPIEL 4041, 1977 Quelle console
in Classic Console Discussion
Posted
It's not mine, just repaired it for a friend. It has 14 bult in games, mostly Pong style. Played some tennis with my daughter and wife and they both loved it.