FreddieBear

OKAY FOUND THE PROBLEM I must tap "C" configure several times until it set the right address. The address it was setting was bogus. 3 or 4 times of tapping the "C" key gets things right. Whew! My previous question still stands. Can I use the 5G network that is available to me on the Atari?

Okay slowly making progress, i think. Can the FujiNet work on the 5G network? Or must I use 2.4Ghz?

I think my router is on the fritz as it is assigning me an address that doesn't exist. Bummer.

Okay thank you Thom. I've managed to view the file but can't see the network config part as in: 192.168.254.21 Is it just missing? [General] devicename=FujiNet hsioindex=6 rotationsounds=1 configenabled=1 boot_mode=0 timezone=PST+8PDT [WiFi] SSID=Frontier7904 passphrase=3660347924 [Bluetooth] devicename=FujiNetSIO2BT enabled=0 baud=19200 [Network] sntpserver=pool.ntp.org [Host1] type=SD name=SD [Host2] type=TNFS name=ATARI-APPS.IRATA.ONLINE [Host3] type=TNFS name=fujinet.online [Host4] type=TNFS name=FujiNet.us.to [Host5] type=SD name=atari8.us [Host6] type=SD name=fujinet.pl [Host7] type=TNFS name=stguild-bbs.ddns.net [Mount1] hostslot=4 path=/Top-games/retrogamer.net top10/Yoomp ! (NTSC Version).xex mode=r [Printer1] type=12 port=1 [Modem] sniffer_enabled=0 [Cassette] play_record=0 Play pulldown=0 B Button Press

Yes, how do I "look" at it? And how do I change it?

I am unfamilar with the EXEC type of file fnconfig.ini. I'd like to get into it and change the access numbers to reflect what I have. Perhaps this is why I can't get onto the net. Anyone here familar with this file type?

Indeed but can I change the config.ini file from a word processor to fix this issue. It's a replacement FN from The Brewing Academy as they replaced my unfixable FujiNet recently.

Yes it does look that way yet I have no control of the FujiNet update. Should I press RESET on FN while it's updating? Latest debug scan: Using 'COM38' as serial port. Showing logs: [18:51:54][18:51:54] [18:51:54]--~--~--~-- [18:51:54]FujiNet 0.5.2656cf16 2021-03-19 17:56:48 Started @ 4 [18:51:54]Starting heap: 4056748 [18:51:54]PsramSize 3917592 [18:51:54]himem phys 4456448 [18:51:54]himem free 4456448 [18:51:54]himem reserved 262144 [18:51:54]Detected Hardware Version: 1.1-1.5 [18:51:54]Enabled Safe Reset Button C [18:51:54]SPIFFS mounted. [18:51:54]SD mounted. [18:51:54]fnConfig::load [18:51:54]Found copy of config file on SD - copying that to SPIFFS [18:51:54]copy_file "/fnconfig.ini" -> "/fnconfig.ini" [18:51:54]copy_file copied 757 bytes [18:51:54]fnConfig::load read 757 bytes from config file [18:51:54]WIFI_EVENT_STA_START [18:51:54]WiFi connect attempt to SSID "Frontier7904" [18:51:54]esp_wifi_connect returned 0 [18:51:54]disk UNMOUNT [18:51:54]disk MOUNT [18:51:54]ATR MOUNT [18:51:54]mounted ATR: paragraphs=5760, sect_size=128, sect_count=720, disk_size=0 [18:51:54]Creating a default printer using FS_SDFAT storage and type 12 [18:51:54]SSH client initialized. [18:51:54]ModemSniffer::ModemSniffer(FS_SDFAT) [18:51:54]SIO SETUP [18:51:54]Set HSIO baud from 0 to 67431 (index 6), alt=68209 [18:51:54]Available heap: 3892184 [18:51:54]Setup complete @ 532 (528ms) [18:51:55]WIFI_EVENT_STA_CONNECTED [18:51:56]IP_EVENT_STA_GOT_IP [18:51:56]Obtained IP address: 192.168.0.100 [18:51:56]SNTP client start [18:51:56]Starting web server on port 80 [18:52:02]WIFI_EVENT_STA_DISCONNECTED [18:52:02]Stopping web service [18:52:02]WiFi reconnect attempt 1 of 8 [18:52:03]WIFI_EVENT_STA_CONNECTED [18:52:03]IP_EVENT_STA_GOT_IP [18:52:03]Obtained IP address: 192.168.0.100 [18:52:03]Starting web server on port 80 [18:52:53]WIFI_EVENT_STA_DISCONNECTED [18:52:53]Stopping web service [18:52:53]WiFi reconnect attempt 1 of 8 [18:52:53]WIFI_EVENT_STA_CONNECTED [18:52:53]IP_EVENT_STA_GOT_IP [18:52:53]Obtained IP address: 192.168.0.100 [18:52:53]Starting web server on port 80 [18:53:13]WIFI_EVENT_STA_DISCONNECTED [18:53:13]Stopping web service [18:53:13]WiFi reconnect attempt 1 of 8 [18:53:13]WIFI_EVENT_STA_CONNECTED [18:53:14]IP_EVENT_STA_GOT_IP [18:53:14]Obtained IP address: 192.168.0.100 [18:53:14]Starting web server on port 80 [18:54:03]WIFI_EVENT_STA_DISCONNECTED [18:54:03]Stopping web service [18:54:03]WiFi reconnect attempt 1 of 8 [18:54:03]WIFI_EVENT_STA_CONNECTED [18:54:04]IP_EVENT_STA_GOT_IP [18:54:04]Obtained IP address: 192.168.0.100 [18:54:04]Starting web server on port 80

Once again I am having trouble with my FujiNet device. It refuses to access the net. Latest update is 3/15/2021 Here is the log error: Unexpected error: could not open port 'COM38': PermissionError(13, 'Access is denied.', None, 5) [18:29:55]WIFI_EVENT_STA_DISCONNECTED [18:29:55]Stopping web service [18:29:55]WiFi reconnect attempt 1 of 8 [18:29:55]WIFI_EVENT_STA_CONNECTED [18:29:56]IP_EVENT_STA_GOT_IP [18:29:56]Obtained IP address: 192.168.0.100 [18:29:56]Starting web server on port 80 [18:30:45]WIFI_EVENT_STA_DISCONNECTED [18:30:45]Stopping web service [18:30:45]WiFi reconnect attempt 1 of 8 [18:30:46]WIFI_EVENT_STA_CONNECTED [18:30:46]IP_EVENT_STA_GOT_IP [18:30:46]Obtained IP address: 192.168.0.100 [18:30:46]Starting web server on port 80 [18:31:14]WIFI_EVENT_STA_DISCONNECTED [18:31:14]Stopping web service [18:31:14]WiFi reconnect attempt 1 of 8 [18:31:14]WIFI_EVENT_STA_CONNECTED [18:31:15]IP_EVENT_STA_GOT_IP [18:31:15]Obtained IP address: 192.168.0.100 [18:31:15]Starting web server on port 80 IP address is wrong. It should state: 192.168.254.17 Need I replace it again?!?

Yes holding down the A (white LED) button switches between Bluetooth (blue LED) and WiFi (white LED). While the white LED is still on (USB powered), I switch on my Atari and it still refuses to boot. Also it doesn't matter if I am powering the FujiNet via USB power or internally via the Atari 800XL. The results are identical - no boot up.

I still have a broken FujiNet and refuses to boot up. This is a major problem (software problem I'm guessing) that renders the device useless. I wish someone could offer a solution other than purchasing another one. These are my thoughts for today.

Yes I did this by holding down the WiFi button which turned off BT.

Using 'COM37' as serial port. Showing logs: [18:43:24][18:43:24] [18:43:24]--~--~--~-- [18:43:24]FujiNet 0.5.e6b3e94e 2021-01-22 01:42:35 Started @ 3 [18:43:24]Starting heap: 4051968 [18:43:24]PsramSize 3932108 [18:43:24]himem phys 4456448 [18:43:24]himem free 4456448 [18:43:24]himem reserved 262144 [18:43:24]FujiNet Hardware v1.0 [18:43:24]SPIFFS mounted. [18:43:24]SD mounted. [18:43:24]fnConfig::load [18:43:24]Found copy of config file on SD - copying that to SPIFFS [18:43:24]copy_file "/fnconfig.ini" -> "/fnconfig.ini" [18:43:25]copy_file copied 717 bytes [18:43:25]fnConfig::load read 717 bytes from config file [18:43:25]Starting SIO2BT [18:43:25]E (2415) BT_OSI: config_save, err_code: 0x4 [18:43:25] [18:43:25]ESP_SPP_INIT_EVT [18:43:25]ESP_SPP_INIT_EVT: client: start [18:43:25]ESP_SPP_START_EVT [18:43:25]Baudrate already at 19200 - nothing to do [18:43:25]disk MOUNT [18:43:25]ATR MOUNT [18:43:25]mounted ATR: paragraphs=5760, sect_size=128, sect_count=720, disk_size=0 [18:43:25]Creating a default printer using FS_SDFAT storage and type 12 [18:43:25]SSH client initialized. [18:43:25]ModemSniffer::ModemSniffer(FS_SDFAT) [18:43:25]SIO SETUP [18:43:25]Set HSIO baud from 0 to 67431 (index 6), alt=68209 [18:43:25]Available heap: 3885308 [18:43:25]Setup complete @ 958 (955ms) [18:45:25]BUTTON_A: LONG PRESS [18:45:25]ACTION: Bluetooth toggle [18:45:25]Stopping SIO2BT [18:45:25]Baudrate already at 19200 - nothing to do [18:45:25]E (122295) BT_OSI: config_save, err_code: 0x4 [18:45:25] [18:45:25]W (122295) BT_APPL: bta_dm_disable BTA_DISABLE_DELAY set to 200 ms [18:45:25]E (122495) BT_OSI: config_save, err_code: 0x4 [18:45:25] [18:45:25]WiFi connect attempt to SSID "Frontier7904" [18:45:25]WIFI_EVENT_STA_START [18:45:25]esp_wifi_connect returned 0 [18:45:25]fnConfig::save [18:45:25]fnConfig::save wrote 717 bytes [18:45:25]Attemptiong config copy to SD [18:45:25]copy_file "/fnconfig.ini" -> "/fnconfig.ini" [18:45:25]copy_file copied 717 bytes [18:45:25]WIFI_EVENT_STA_CONNECTED [18:45:26]IP_EVENT_STA_GOT_IP [18:45:26]Obtained IP address: 192.168.254.17 [18:45:26]SNTP client start [18:45:26]Starting web server on port 80 [18:45:28]SNTP time sync event: Sat Jan 23, 18:45:27 2021 -0800 [18:45:44] Serial port closed! Thanks for helping out. BT blue LED out and white LED full on. Still can't boot. Same issue.

I'm sorry but I don't know what a debug monitor actually is nor how to access it. Please advise. Is it within my Atari?

When I RESET the FujiNet all LEDs within the case dim. Then I turn on the Atari 800XL and the orange (right most) LED lights briefly and the white LED (left side) lights up but I ALWAYS get dumped into the READY prompt / blue screen. FJ just doesn't "Catch". The blue LED stay on always.