Onlyfordj

Thank you very much for your help. This is what appears.

Hi. I was given a Commodore C128 this morning that works properly. I have removed the CIA and put in my computer the correct CIA of the other computer... and the prompt READY does not appear. On the computer they have left me, with my CIA if the prompt READY appears.

No cursor appears on the screen after starting in 40/80 columns and pressing the keys you tell me. Keep in mind that I connect the computer through RCA and maybe the process you tell me is for if I use monitor. Thank you. This is what appears when I press the RUN/STOP key and turn on the computer. While on this screen the keyboard does not respond. Exchanged chips (they are in sockets) fixing me in the correct insertion position. Still not showing the READY command. Does not show READY command. Many thanks to all!!!

Hola. Sí, soy de España. Mi idioma inglés es muy pobre y uso una aplicación de traducción. Iniciar en modo 128 y iniciar en modo 64 Thank you very much for your help

Hi. The 40/80 key does not stay tight. If I press it, the screen appears grey inside and green outside. If I start the computer in C64 mode, READY appears. No, I don’t have any disk drives connected. No, I don’t have a disk drive that I can connect. Those CIA chips... they’re welded directly to the motherboard? The computer is mine and has never been modified. Thanks!!!!

Hello. Sorry, I make it at home for myself. In the first post there is a small explanation of what materials I use. They are all very cheap. Yes, I am from Spain, that post is mine showing my progress in making overlays in that forum. But cheer up, I make them at home. It's very easy to do. I will post a lot more soon!!!

I have returned to homemaking Overlays... the cost of each is still around 1€. I’ll upload pictures of them.

Hello, a few days ago I took my Commodore C128 out of the closet to play with it. I turned it on and strange symbols appeared on the screen, so I thought the RAM might have gone bad. I have changed the RAM that was broken and now it shows a good image and the C64 mode also works very well. But... in mode 128 the READY command does not appear on the screen. I have a diagnostic cartridge for my C64, the result is that everything is fine... but of course... it is for C64. I have a KUNFU FLASH cartridge that runs programs and games in cartridge format (.crt) and floppy disk format (.d64) and everything runs correctly. I have searched for information about the problem that the READY command does not appear in mode 128 and I have not found where the problem could be.

Where could i find the Videopac G7200 Service Manual? Not all the keys work and I don't know how to access the keyboard membrane. Thanks.

Traveling the net, I found this newly created game called Resident Evil Zero for Playstation 1. I was surprised that there are still people programming games for playstation 1 and it’s more... it’s like a conversion of the same game they released for the Gamecube console... I’ve played it and it’s very entertaining. https://www.youtube.com/watch?v=TMKOfFT3iU4

To date, since which country is it shipped?

I’m from the Spectrum era, Amstrad... when games were loaded through the cassette. I don’t know... I like to listen and see how they carry slowly...

Ummm....could you make some of this cartridge?

New games update 05-09-23: Mega: https://mega.nz/file/PFtFHIAZ#tKQ2F_prxBNQLwfohVxwy568hzsKur_aFcC9YJEoKyE In post: xegs.rar

Hello.- These are some examples of cassette players from Atari to load wav programs recorded on cassette tape stand. These wav games that are in the first post have been checked their load through these cassettes and loaded onto an Atari XEGS computer (not emulators)

It seems strange.... but I have been more than a week looking for games in wav format that really work in an Atari XE System (Atari XEGS). These wavs are totally clean, that is, you do not need to have anything modified and are checked several times its correct load on a real computer. Connect your player (the one you use for your Atari), turn on the Atari and charge. What I had found in other posts were wavs that were modified and required you to have a special cartridge on the Atari and, what’s more, they were only checked in emulator or unchecked, only transformed and hung in the post and you will already check if they work or not. A pity the truth. You have to check it on a real machine. The truth is that wavs that are proven to work on a real machine without modifying anything at all... is difficult to find. that it is the emulator, it will never be like the real machine.The truth is that some wav that are proven to work. Perdon by my language, I am Spanish and English I learned in school These are a few. Mega: https://mega.nz/file/CVUDQBwL#DgOzVcUs38cnW70t0BW9SRyxM2ETZAa96KXqnfD3faI In Post: xegs.rar

Thank you very much for your reply Oh! I didn’t know I had to have the XC12 modified. It’s not the Injektor version

BOOT ERROR My equipment is Atari XE System, XC12, Electronic adapter cassette, Marantz professional cassette equalizer... Now I have tested 196. All with load error.

But all these files work on a real Atari machine? It has been tested around 150 and none works.

I've pulled out my collectvision to play with it and now when I turn it on with a game inserted, it automatically picks a player on the select screen and gets into the game within split seconds. Always choose without my control. It always does, whether the joystick is in place or not. https://youtube.com/shorts/LIS6WUDzKxc?feature=share

Ok, I'll sign up for the waiting list... when it opens. Thank you.

From which country will the Atari7800GD be shipped?

Can this be purchased anywhere? My knowledge to manufacture it is zero.

Okay Dave. I am interested in the one you have for sale and also some web link to try to do it myself.

A few days ago a Dragon 32 arrived. It works correctly. To enjoy your games, most of the time you need to play them with Joystick. Where could I get some? I know there are adapters to use Atari controllers (or other controllers) but the price, for now, I have found very high. I'm new to the Dragon and I'm lost when it comes to peripherals.