Jump to content

Corcomp RS232 problem


Recommended Posts

Hello every one Corcomp rs232 board is strange..

i discovered that no work if i have corcomp FDC card.
This is PEB configuration:
PE cable Slot 1
TI-RAM 32K Slot 2
Horizon 2000 Slot 3
CC rs232 Slot 7
CC FDC Slot 8
Computer go in crash at power on.
Leave CC FDC at insert TI FDC and computer is working and if i write command OLD RS232 the CC rs232 card light on.. at now seem that CC rs232 and cc fdc have equal address / irq or that go in conflict.. every one have jumper info for cc rs232?? I think is release one.

Had a strange upgrade maybe for use with geneve computer??
Thanks at all

Link to comment
Share on other sites

Forget.. for test i first leave all board.. only PEbox cable and rs232 and working.. after i insert cc fdc and TI99 go in crash, after i leave CC fdc, insert exp 32k ram, horizon card and TI99 working. Finally i try at insert again CC-FDC and TI go in crash. Leave CC fdc and insert original TI fdc and TI work perfect.. Then CC rs232 and CC FDC no working together and it is strange!!


If i leave CC rs232 and insert TI rs232 and insert CC FDC ti99 is working!

Edited by Astharot
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Create New...