Parrothead Posted January 5, 2015 Share Posted January 5, 2015 (edited) Hey Guys, I have purchased the Atari Jaguar tooling for a future venture and have been reading how many of you have expressed interest in getting a translucent console shell. I would be able to run these for you at $45 each delivered in the USA (if you are international please email me for shipping cost prior to Paypaling - socalmike@gamegavel.com . Delivery would be sometime late January / early February. This would include the translucent clam shell as well as the translucent button and light pipe. I am not completely sure at this point if this will include the back panel molding of the console which was removed by the dental company, although I believe we have the tooling to correct it and bring back to the original. I also understand the board posts inside the bottom of the Jag were modified by the dental company, and will try and have this issue corrected and brought original for this mold run although I can't guarantee this yet. My injection molder is looking into these issues when we take delivery of the tooling mid Jan. These will be produced in Southern California. If any of you are also interested in translucent cartridge cases, I can provide those as well for $8 each delivered. Keep in mind this is a textured translucent, not polished/window clear. I would prefer to sell a minimum of at least (50) consoles so if you are interested, type in your username and make your payment via Paypal to admin@gamegavel.com and reference JAG SHELL. If you want a cartridge, please include that as well by indicating quantity as x1 or x2, x3, etc. next to your name. Console Shell ($45) Cart Shell (8$) CD Shell ($?) 1) save 2600 1 1 ? 2) lachoneus 1 ? ? 3) jaybird3rd 1 ? ? 4) xucaen ? ? ? 5) clint Thompson 1 ? 1 6) travistouchdown 1 2 1 7) willard 1 ? ? 8 superdork3000 ? ? ? 9) atariguy1021 1 2 ? 10) panamajoe 1 2 ? 11) txg/mnx ? ? ? 12) sargon ? ? ? 13) peter g ? ? ? 14) guitari 1 4 1 15) atariLBC 1 ? 1 16) 17) 18) 19) 20) 21) 22) 23) 24) 25) 26) 27) 28) 29) 30) 31) 32) 33) 34) 35) 36) 37) 38) 39) 40) 41) 42) 43) 44) 45) 46) 47) 48) 49) 50) Edited January 15, 2015 by Parrothead 18 Quote Link to comment Share on other sites More sharing options...
+save2600 Posted January 5, 2015 Share Posted January 5, 2015 If it includes the rear backplane and the posts/screwholes support the main board (I have a spare board I'd want to actually use it with), I'd like a console and cartridge shell! Quote Link to comment Share on other sites More sharing options...
+doctorclu Posted January 5, 2015 Share Posted January 5, 2015 Sounds like a lot of fun. Has anyone found the mold for the controllers by chance? Quote Link to comment Share on other sites More sharing options...
+BitJag Posted January 5, 2015 Share Posted January 5, 2015 Awesome! It's good to hear that those molds got into the hands of someone who can use them. Thank you so much for the offer, and expect my order soon Quote Link to comment Share on other sites More sharing options...
xucaen Posted January 5, 2015 Share Posted January 5, 2015 Are there any pictures of what these would look like? 1 Quote Link to comment Share on other sites More sharing options...
jaybird3rd Posted January 5, 2015 Share Posted January 5, 2015 I'm glad to know that these molds ended up in good hands! I'll be contacting you about my order soon! Quote Link to comment Share on other sites More sharing options...
Clint Thompson Posted January 5, 2015 Share Posted January 5, 2015 That's GREAT news!! I'm so glad these landed in the hands of someone willing to do something with them instead of melting them away. Frosted translucent carts! Quote Link to comment Share on other sites More sharing options...
Rick Dangerous Posted January 6, 2015 Share Posted January 6, 2015 (edited) Well this is cool. I'd use a translucent cart to house my skunk!! Will be open to reserving some stuff as details follow. Edit: if you can enclose the back of the console and add supports, put me down for one. This is what kept me away from the white molds. I'll also take 2-3 translucent shells when they are available. Edited January 6, 2015 by travistouchdown 1 Quote Link to comment Share on other sites More sharing options...
Rick Dangerous Posted January 6, 2015 Share Posted January 6, 2015 Sounds like a lot of fun. Has anyone found the mold for the controllers by chance? Imagine systems did not have any controller molds, regular or pro (is what I was told anyway.) Quote Link to comment Share on other sites More sharing options...
Clint Thompson Posted January 6, 2015 Share Posted January 6, 2015 I may be jumping the gun a'bit here but... if the console shells turn out to be funded/succesful... would you consider doing JagCD shells as well so we can have a matching setup? 1 Quote Link to comment Share on other sites More sharing options...
Willard Posted January 6, 2015 Share Posted January 6, 2015 also i'd love a translucent jaguar shell if it matched the original spects (ie. the part that was removed restored). Never brought myself to buy one of those white ones due the the missing sections. Quote Link to comment Share on other sites More sharing options...
SuperDork3000 Posted January 6, 2015 Share Posted January 6, 2015 AWESOME! I definitely want a bunch of each. Quote Link to comment Share on other sites More sharing options...
atariguy1021 Posted January 6, 2015 Share Posted January 6, 2015 I'd likely be in for one console shell and a couple carts. I'd want to know if the back and screw post issues will be fixed before officially committing. Quote Link to comment Share on other sites More sharing options...
panamajoe Posted January 6, 2015 Share Posted January 6, 2015 I`d be interested in a Jag-shell and two cart shells... Quote Link to comment Share on other sites More sharing options...
TXG/MNX Posted January 6, 2015 Share Posted January 6, 2015 Damn good looking skunkcard will want 5 of those :-) Quote Link to comment Share on other sites More sharing options...
TXG/MNX Posted January 6, 2015 Share Posted January 6, 2015 can you post pictures of the transparant case ? Quote Link to comment Share on other sites More sharing options...
Parrothead Posted January 6, 2015 Author Share Posted January 6, 2015 Hey Guys, OK, I will start adding names to the list in preparation in gauging interest. To answer a few questions, I am taking delivery of the molds mid January. At that time I have to set them up and test run some molds. I was hoping to kill two birds with one stone and use those molds to sell to those of you who want them. I will have to wait until they arrive and see if my injection molder can bring them back to the original to give us the back panel and correct PCB post layout. I am not actually sure that back panel as it was with the Jag will work in our next repurposing of the console, more on that revealed at a later date So will have to see if I can temporarily run them with the Jag panel and then make future adjustments for my application. As far I know the cartridge AND CD Drive unit haven't been modified so yes, I would love to make the CD unit available to those that want that so let me know if you are also interested in that. Should be fun! Mike Quote Link to comment Share on other sites More sharing options...
Rick Dangerous Posted January 6, 2015 Share Posted January 6, 2015 Hey Guys, OK, I will start adding names to the list in preparation in gauging interest. To answer a few questions, I am taking delivery of the molds mid January. At that time I have to set them up and test run some molds. I was hoping to kill two birds with one stone and use those molds to sell to those of you who want them. I will have to wait until they arrive and see if my injection molder can bring them back to the original to give us the back panel and correct PCB post layout. I am not actually sure that back panel as it was with the Jag will work in our next repurposing of the console, more on that revealed at a later date So will have to see if I can temporarily run them with the Jag panel and then make future adjustments for my application. As far I know the cartridge AND CD Drive unit haven't been modified so yes, I would love to make the CD unit available to those that want that so let me know if you are also interested in that. Should be fun! Mike If you can do the case in clear with the posts and backing in place, put me down for a clear CD unit as well !! Quote Link to comment Share on other sites More sharing options...
PeterG Posted January 6, 2015 Share Posted January 6, 2015 Great! I was hoping someone would do something like that. And nice to hear about cdrom and Charts AS well.excellent news. 1 Quote Link to comment Share on other sites More sharing options...
Guitari Posted January 6, 2015 Share Posted January 6, 2015 I'm up for a clear shell, 4 cart cases and delivery to UK. I have the white model and trust me guys an open back is no particular problem. Cutting and repositioning screw posts is a pain though so hopefully that can be fixed. Up for a jag cd shell if that's possible too. Very much want to see a picture. Thanks. Quote Link to comment Share on other sites More sharing options...
EmOneGarand Posted January 8, 2015 Share Posted January 8, 2015 (edited) Would I be able to just get some cartridge shells or is this a package deal only (as in can't buy one without buying the other)? Edited January 8, 2015 by EmOneGarand Quote Link to comment Share on other sites More sharing options...
+SabertoothRetro Posted January 8, 2015 Share Posted January 8, 2015 I'm interested in a jaguar case if the post issue is addressed. I'd also love a jag cd case when you're ready. Quote Link to comment Share on other sites More sharing options...
masematte Posted January 8, 2015 Share Posted January 8, 2015 Ill send you an pm,, pit me in for : Jaguar and Cart Shell Quote Link to comment Share on other sites More sharing options...
Rick Dangerous Posted January 8, 2015 Share Posted January 8, 2015 Just to clarify, 1 console shell, 2 cart shells, 1 CD Unit shell Quote Link to comment Share on other sites More sharing options...
dilinger Posted January 8, 2015 Share Posted January 8, 2015 I've also sent an email to socalmike@gamegavel.com but no reply yet about the shipping cost to Canada. Quote Link to comment Share on other sites More sharing options...
Like us on Facebook
Follow us on Twitter
AtariAge on Instagram
Watch us on YouTube
Chat on Discord
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.