SuperDork3000 Posted March 17, 2015 Share Posted March 17, 2015 Does any modification need to be done if you use the original base with the top shell? Quote Link to comment Share on other sites More sharing options...
Guitari Posted March 17, 2015 Share Posted March 17, 2015 Hi all Would I be ok to get hold of an NTSC / USA Jag motherboard for the translucent case for use with a UK power adapter? Both USA and UK adapters output 9v DC 1.2A so I can't see the problem there plus my TVs detect both NTSC and PAL. Cheers Quote Link to comment Share on other sites More sharing options...
danny_galaga Posted March 17, 2015 Share Posted March 17, 2015 Hi all Would I be ok to get hold of an NTSC / USA Jag motherboard for the translucent case for use with a UK power adapter? Both USA and UK adapters output 9v DC 1.2A so I can't see the problem there plus my TVs detect both NTSC and PAL. Cheers Console uses the same voltage (9V), regardless of wall voltage. I have a US console using a Euro power supply. 1 Quote Link to comment Share on other sites More sharing options...
Guitari Posted March 17, 2015 Share Posted March 17, 2015 ..in Australia.. Thanks Danny Quote Link to comment Share on other sites More sharing options...
sh3-rg Posted March 17, 2015 Share Posted March 17, 2015 ..in Australia.. Thanks Danny I can't remember if you have a switched Jaguar, if not, then you're in for a treat with a real NTSC machine. 1 Quote Link to comment Share on other sites More sharing options...
AtariBorn Posted March 17, 2015 Share Posted March 17, 2015 (edited) Order doubled. Another payment sent. (Total: Jag Shells X 2 & Cart Shells X 8 ) Edited March 17, 2015 by AtariBorn Quote Link to comment Share on other sites More sharing options...
LinkoVitch Posted March 17, 2015 Share Posted March 17, 2015 Hopefully I got that order in on time for 1x console shell. Quote Link to comment Share on other sites More sharing options...
Felyx Posted March 17, 2015 Share Posted March 17, 2015 what are the shipping fees for Europe? Quote Link to comment Share on other sites More sharing options...
Guitari Posted March 17, 2015 Share Posted March 17, 2015 I can't remember if you have a switched Jaguar, if not, then you're in for a treat with a real NTSC machine. Quote Link to comment Share on other sites More sharing options...
Guitari Posted March 17, 2015 Share Posted March 17, 2015 Did the region mod on my dental jag 1 Quote Link to comment Share on other sites More sharing options...
Guitari Posted March 17, 2015 Share Posted March 17, 2015 what are the shipping fees for Europe? $24 to UK.. Maybe similar to France. 1 Quote Link to comment Share on other sites More sharing options...
Guitari Posted March 17, 2015 Share Posted March 17, 2015 Hi all Would I be ok to get hold of an NTSC / USA Jag motherboard for the translucent case for use with a UK power adapter? Both USA and UK adapters output 9v DC 1.2A so I can't see the problem there plus my TVs detect both NTSC and PAL. Cheers So an ntsc board and rf cage are on their way to me. What have we all got.in mind? I'm just going to shove the board and rf cage in there. Something about not having the cage doesn't seem quite right with me. Shant do region mod or swap the led to a blue one like I did with my white shell. Quote Link to comment Share on other sites More sharing options...
+save2600 Posted March 17, 2015 Share Posted March 17, 2015 Can't keep a Jaguar caged for too long 'ya know! Seriously… unless you plan on using the RF output on the Jag, why bother? Any (if at all) spurious noise from the system would/should/maybe/probably not even affect the RF output today. Could always add an aluminium (spelt that way just for you Guitari - ha!) painted pattern to your shell, which would turn her back into a Panther if you're worried about such "noise". Quote Link to comment Share on other sites More sharing options...
racerx Posted March 17, 2015 Share Posted March 17, 2015 So an ntsc board and rf cage are on their way to me. What have we all got.in mind? I'm just going to shove the board and rf cage in there. Something about not having the cage doesn't seem quite right with me. Shant do region mod or swap the led to a blue one like I did with my white shell. Not sure if I see the point, if you're going to leave the ugly cage on it. 1 Quote Link to comment Share on other sites More sharing options...
thucom Posted March 18, 2015 Share Posted March 18, 2015 so whats the final tally on the orders? Quote Link to comment Share on other sites More sharing options...
Clint Thompson Posted March 18, 2015 Share Posted March 18, 2015 so whats the final tally on the orders? Good question, I e-mailed asking about shipping total for carts but never heard back... guessing in due to the overwhelming response. Quote Link to comment Share on other sites More sharing options...
+Sargon Posted March 18, 2015 Share Posted March 18, 2015 I was able to get an order in under the gun for a couple clear carts to house my Skunkboards. Now the question becomes, what is the best tool to use to make clean cuts in the plastic? Quote Link to comment Share on other sites More sharing options...
Tron Unit Posted March 18, 2015 Share Posted March 18, 2015 I would probably just use a Dremel. Quote Link to comment Share on other sites More sharing options...
Felyx Posted March 18, 2015 Share Posted March 18, 2015 $24 to UK.. Maybe similar to France. Thank you for answering. I will see if I can make a crystal cartrdige by myself, using a silicon mold and translucent resin. Quote Link to comment Share on other sites More sharing options...
busterm Posted March 18, 2015 Share Posted March 18, 2015 I wonder why they didnt do something similar to this kickstart with the molds https://www.kickstarter.com/projects/1670214687/original-commodore-64c-computer-housing-in-new-coo 1 Quote Link to comment Share on other sites More sharing options...
Bill Loguidice Posted March 18, 2015 Share Posted March 18, 2015 I wonder why they didnt do something similar to this kickstart with the molds https://www.kickstarter.com/projects/1670214687/original-commodore-64c-computer-housing-in-new-coo Kickstarter really does best with products with more general appeal. There's a relatively large market of C-64 enthusiasts and a relatively small market of Jaguar enthusiasts. 1 Quote Link to comment Share on other sites More sharing options...
pcefan Posted March 18, 2015 Share Posted March 18, 2015 Payment sent x 2 jag cart Thanks. Quote Link to comment Share on other sites More sharing options...
SuperDork3000 Posted March 18, 2015 Share Posted March 18, 2015 Payment sent x 2 jag cart Thanks. You know that the cut off for payment was 2 days ago, right? Quote Link to comment Share on other sites More sharing options...
+kheller2 Posted March 19, 2015 Share Posted March 19, 2015 I wonder why they didnt do something similar to this kickstart with the molds https://www.kickstarter.com/projects/1670214687/original-commodore-64c-computer-housing-in-new-coo Oh why oh why couldn't it have been an Atari 8bit mold... Quote Link to comment Share on other sites More sharing options...
+Sargon Posted March 19, 2015 Share Posted March 19, 2015 I would probably just use a Dremel. I have to admit that I have never used one before. Can anyone recommend the best attachment for precision cutting? Quote Link to comment Share on other sites More sharing options...
Like us on Facebook
Follow us on Twitter
AtariAge on Instagram
Watch us on YouTube
Chat on Discord
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.