Joystick (DIY) OSx16 Joystick-Mice Adapter (OSxJmice)

[Atari 2600 H.E.R.O]

After "OSx16 Multi Bankswitch Board":

http://atariage.com/forums/topic/242873-diy-multi-bs-with-atmega8-for-atari-2600/

Just "OSx16 Joystick-Mice Adapter."

With This Adapter, Connect Atari Standard Joystick

To PC/LAPTOP.

Connect Adapter To Serial RS-2323 Port (COM PORT)

And Play Atari Games Under OSx16 Operating System With Joystick.

With Only :

1xMCU (Atmega8A)

1xTransistor

5xResistor

1xCapacitor

3xDiode

1xDB-9 - Male

1xDB-9 - Female

Firmware and "OSx16 Version 6.22 Beta CD-ROM" (Schematic and Values and Device Driver are In CD-ROM) Address :

http://1drv.ms/1iE3ci3

Edited December 7, 2015 by Atari 2600 H.E.R.O

[Atari 2600 H.E.R.O]

CD-ROM Image Size < 13MB (Zipped Size)

Firmware Size < 1KB (Zipped Size)

[Atari 2600 H.E.R.O]

Dear Atari/Commodore/DOS Games Friends

Due To Some Problems For Obtaining and Burning CD-ROM's,

Bootable Image File For USB Flash Devices,

"OSX16 Version 6.22 Beta Release Revision 6.22.04 (USB).IMG",

is Available, Just Now.

Attention :

Don't Use Any Boot-Flash Burner For Burning Bootable USB Flash Device.

Use Hex File/Drive Editor, Only.

Extract .7z File -> "OSX16 Version 6.22 Beta Release Revision 6.22.04 (USB).IMG"

1) Open File (USB .IMG File)

2) Select All

2) Copy

3) Open Drives

4) Select and Open USB FLASH MEMORY AS PHYSICAL Drive

5) Paste Over

6) Save Changes.

Don't Attempt To Open Drive In Windows (Contents Are Invisible).

Plug USB Flash to USB Port

Restart System and Select Boot Drive -> USB

Good Luck