Jump to content
IGNORED

PacManPlus' Blog - 1/4" scale working upright Pac-Man cabinet - com


RSS Bot
 Share

Recommended Posts

Finally completed!

This idea started when I acquired a 5" LCD panel about a year ago, and I thought about making a mini arcade machine around it. I figured 1/4" scale, because originally they used 19" monitors, so 20" (I rounded up) divided by 5" = 4. I then decided to start with a mini upright pacman, and would like to do others as well (i.e. Asteroids, Defender, Galaga, etc.) Sort of like a 'mini arcade' for people like me who don't have the room for full size cabinets. :D

First this I have to say, is that this would not have been possible without John from Boulder Arcade Factory. He was helpful, willing to try something new (he usually sells full size cabinet recreations... I made a Cabaret version with one of his cabinets here), and just a nice person all around.
John made the scaled-down cabinet out of MDF, and I took it from there. The cabinet was perfect, and he paid attention to every detail.

Unfortunately, the side art I had printed last year came up a little short (about 1/2 inch), so I painted the bottom. I must have mis-measured last year when I was trying to build it myself.
Other than that, I tried to follow the exact way the full size cabinet is made. I ended up 3-D printing:
- The marquee retainers
- The red joystick ball
- The Control Panel itself
- The Coin Door
- The speaker grill

I found a small joystick on the net and used that as you can see in the pictures.
I pulled off the keycap, and printed the Red ball as noted above.

I also used Orange magic marker for the ‘t-molding’, and black marker for the inside. ;)







Still need to figure out a 'non-permanent' way to attach the monitor bezel (which has the LCD panel attached to it), as well as the Control Panel.
I used a Raspberry Pi for the innards, and made it boot directly into Pac-Man only.

Thanks, guys!
Bob

Attached thumbnail(s)
  • blogentry-1787-0-34233400-1467637157_thu
  • blogentry-1787-0-62534600-1467637160_thu
  • blogentry-1787-0-56985100-1467637163_thu
  • blogentry-1787-0-34217600-1467637165_thu
  • blogentry-1787-0-18343100-1467637167_thu
  • blogentry-1787-0-73540000-1467637169_thu
  • blogentry-1787-0-23280500-1467637172_thu
  • blogentry-1787-0-76450700-1467637174_thu
  • blogentry-1787-0-04139700-1467637178_thu
  • blogentry-1787-0-38348800-1467637181_thu
  • blogentry-1787-0-85203000-1467638377_thu
  • blogentry-1787-0-80906000-1467638378_thu


http://atariage.com/forums/blog/17/entry-13130-14-scale-working-upright-pac-man-cabinet-complete/
Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...