Jump to content

Cleaning a Roller Controller?


Recommended Posts

I just got a great deal on a Roller Controller. Item appears to work very well. I do have a question about cleaning the trackball.


The trackball seems to move to the Left a little better than it moves to the right. I've run into things like this before with other trackball devices.


Any suggestions on how to disassemble & clean?


Any other advice for maintaining a Roller Controller?



Thanks in advance for any and all advice.

  • Like 1
Link to comment
Share on other sites

I will answer my own question here just in case anyone searches for this in the future.


Very easy to disassemble the Roller Controller. I used compressed air to blow out the dist from the board and all of the bearings. I used a damp q tip with a tiny bit of rubbing alcohol to clean the switch contacts.


Reassembled and smooth as could be.



Link to comment
Share on other sites

  • 8 months later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Create New...