Jump to content

Filler plate wanted


Recommended Posts

What kind of issues did you have? Was the filler plate not substantial enough?


The opening on the TI's disk bay is actually a little wide if you want the filler plate to be flush with the drive. I suppose I could have used some shims but that would look ugly. I also could have super glued the faceplate to the Lotharek, but that was too permanent for me. Since I did not want to have a crappy look or something that could not easily be undone I went for the drawer.

Link to comment
Share on other sites

I originally wanted to go with just a face plate too, but found mounting issues to be a problem. I eventually went with one of

<< THESE >> and it works great. I did however install a larger screw in the side to prevent the drawer from opening.

It's pretty solid and has worked out great.


There are several similar/cheaper versions. I usually look for a USA source.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Create New...