Install USB Drivers for Harmony Cartridge

[mceiras]

Hi! I´m using Windows 10 Pro 64 bits version.

My Harmony Program Tool can´t found the Harmony Cartridge

I install the drivers and apparently everything worked perfectly.

 

The virtual com port have the following setup:

 

 

But the harmony Programming Tool continued not finding the harmony cartridge

 

The only problem in Device Manager is the following:

When I insert the USB cable into the Harmony cartridge I hear the Windows characteristic sound that something has been inserted into a USB port.

What can I do ?



best regards and thanks in advanced,

Marcelo

What can I do ?

Edited August 15, 2018 by mceiras

[OldSchoolRetroGamer]

If i am understanding correctly THESE are the drivers required for Windows 64 bit http://www.ftdichip.com/Drivers/CDM/CDM%20v2.12.28%20WHQL%20Certified.zip

 

As linked to / mentioned in this thread : http://atariage.com/forums/topic/156500-latest-harmony-cart-software/?do=findComment&comment=1920256

 

You certainly lose nothing in attempting to install them. Otherwise I can only suggest you try a different USB cable or port on your PC.

[MMarcoux66]

Having the exact same issue. Machine sees the card but the software does not. Hope someone can figure this out. Even FT Prog sees it.... Windows 10 x64 and tried a Windows 7 x86.