pjduplooy Posted October 4, 2018 Share Posted October 4, 2018 Hi guys Anyone have a Mini Memory LBLA (in .wav or .dsk format) that I can use in JS00'er? Quote Link to comment Share on other sites More sharing options...
+arcadeshopper Posted October 4, 2018 Share Posted October 4, 2018 it comes with classic99 i believe.. easy to grab it Quote Link to comment Share on other sites More sharing options...
pjduplooy Posted October 4, 2018 Author Share Posted October 4, 2018 Hi arcadeshopper. It is an .obj file for classic99. I need a wav for js99'er (or could a disk work?) Quote Link to comment Share on other sites More sharing options...
+arcadeshopper Posted October 4, 2018 Share Posted October 4, 2018 probably could import that into a disk image.. I would think that would be in the dev area's resources page but it's not.. Quote Link to comment Share on other sites More sharing options...
+Schmitzi Posted October 4, 2018 Share Posted October 4, 2018 untested one: (don´t have a .WAV) Line-by-Line Assembler (1982)(Texas Instruments)req. PHM 3058.dsk Quote Link to comment Share on other sites More sharing options...
+mizapf Posted October 4, 2018 Share Posted October 4, 2018 This is a synthetic wave; it is loaded by MAME, but I don't know whether it works for a real console. It uses a square wave instead of the reverse sawtooth (don't know the name of that wave form). Lines_Asm_remastered.wav 3 Quote Link to comment Share on other sites More sharing options...
pjduplooy Posted October 5, 2018 Author Share Posted October 5, 2018 Thank you guys The wav file works perfectly in JS99'er (as well as Classic99!!) 2 Quote Link to comment Share on other sites More sharing options...
+FarmerPotato Posted November 23, 2018 Share Posted November 23, 2018 I have not been able to get any of the LBLA.wav files to load into: Beige TI-99/4A with F18A. Mini Memory. Single cassette cable, white going to PC headphone jack. I have tried adjusting the volume, as in the old days, but no go. "Error - No Data Found" every time. Sigh. I am about to try to make an actual cassette out of it. Quote Link to comment Share on other sites More sharing options...
+arcadeshopper Posted November 24, 2018 Share Posted November 24, 2018 I have not been able to get any of the LBLA.wav files to load into: Beige TI-99/4A with F18A. Mini Memory. Single cassette cable, white going to PC headphone jack. I have tried adjusting the volume, as in the old days, but no go. "Error - No Data Found" every time. Sigh. I am about to try to make an actual cassette out of it. It may be the sound card on the peecee.. I've had problems with newer systems.. ended up with a bluetooth cassette device that works perfect Greg Quote Link to comment Share on other sites More sharing options...
+FarmerPotato Posted November 24, 2018 Share Posted November 24, 2018 It may be the sound card on the peecee.. I've had problems with newer systems.. ended up with a bluetooth cassette device that works perfect Greg Bingo. LBLA Remastered loads from the headphone jack on my Mac. But, it doesn't run, just blank cyan screen. 1 Quote Link to comment Share on other sites More sharing options...
+FarmerPotato Posted November 24, 2018 Share Posted November 24, 2018 (edited) Bingo. LBLA Remastered loads from the headphone jack on my Mac. But, it doesn't run, just blank cyan screen. Actually, LBLA runs fine now. My sidecar project was fighting over the module ROM space. It is killing memory reads from the module ROM when address line A9 is high. So, every other 64 bytes is garbage. I noticed that the ROM ref/def table was partly trashed. Edited November 24, 2018 by FarmerPotato 1 Quote Link to comment Share on other sites More sharing options...
+FarmerPotato Posted November 28, 2018 Share Posted November 28, 2018 Actually, LBLA runs fine now. My sidecar project was fighting over the module ROM space. It is killing memory reads from the module ROM when address line A9 is high. So, every other 64 bytes is garbage. I noticed that the ROM ref/def table was partly trashed. All good now. I had been lazy and had a LVC245A reading the side port data bus all the time. When I removed this load from the data bus, the module space >6000 and >7000 went back to correct behavior, i.e. able to supply their data correctly in all cases. I am now up to 256 bytes of test program in LBLA. 2 Quote Link to comment Share on other sites More sharing options...
gferluga Posted September 18, 2023 Share Posted September 18, 2023 On 10/4/2018 at 11:23 PM, Schmitzi said: untested one: (don´t have a .WAV) Line-by-Line Assembler (1982)(Texas Instruments)req. PHM 3058.dsk 180 kB · 139 downloads Sorry, but how to use it? Thanks! Quote Link to comment Share on other sites More sharing options...
ti99iuc Posted September 18, 2023 Share Posted September 18, 2023 @gferluga https://www.ti99iuc.it/web/index.php?pageid=database_cerca&archivioid=317 Check if you can find help here, there Is also the link to the manual Quote Link to comment Share on other sites More sharing options...
gferluga Posted September 18, 2023 Share Posted September 18, 2023 Thank you Ciro! Wha I see is: Quote Link to comment Share on other sites More sharing options...
gferluga Posted September 18, 2023 Share Posted September 18, 2023 And btw, in the Italian Mini Memory manual (unofficial) is referring to: CALL INIT 100 CALL LOADC28706,0,0,0,0 0,0,0,0) 110 CALL LOAD( "DSK1. DEMO"> 120 CALL LINK("LINES") What is the disk with the DEMO program? Thanks in advance... Quote Link to comment Share on other sites More sharing options...
ti99iuc Posted September 18, 2023 Share Posted September 18, 2023 The italian manual Is an unofficial version made by someone in the eighties. I Always thought that the demo was the name of Lines but Just with a changed name. i have found only the manual without any disk included so i don't know if It was a different demo. Quote Link to comment Share on other sites More sharing options...
gferluga Posted September 18, 2023 Share Posted September 18, 2023 Quote Found it. Thank you. Quote Link to comment Share on other sites More sharing options...
+acadiel Posted September 19, 2023 Share Posted September 19, 2023 Just for a FYI, people keep forgetting about this: https://ftp.whtech.com/Cassettes/ 2 Quote Link to comment Share on other sites More sharing options...
Like us on Facebook
Follow us on Twitter
AtariAge on Instagram
Watch us on YouTube
Chat on Discord
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.