shear_xear Posted January 27, 2019 Share Posted January 27, 2019 Hi everyone. So I just got an Odyssey 2 and it turns on and loads games just fine. Unfortunately the controllers do nothing when you try and use them. I swapped in a known working joystick and still nothing in either controller jack. This is the type of Odyssey where the controller cord feeds into the console. I even removed the part fhat the controller plugs into on the board and soldered the wires straight to the board and got nothing. Any idea which part might be the culprit? Thanks!! Quote Link to comment Share on other sites More sharing options...
metarog Posted January 30, 2019 Share Posted January 30, 2019 It might be bad Controller chips or a broken trace from the chips to the controllers. Take a close look on the motherboard and see if there is any corrosion or damage between the controller inputs and the chips. Quote Link to comment Share on other sites More sharing options...
shear_xear Posted January 31, 2019 Author Share Posted January 31, 2019 Ok. I looked quickly, but will do a double check. Thanks! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.