RSS Bot Posted April 27, 2019 Share Posted April 27, 2019 I finally received approval to turn the system on as of Friday the 26th. Somethings not quite right though as it shows Standby and the Powerwall at 0%.Solar power is being generated though, so the standby above is most likely for the Powerwall.I am able to utilize it as seen in the following. gap from when I tried to activate Powerwall by rebooting system got my Model 3 back from the body shop and plugged it in to charge. Unplugged at 5pm when I left for the evening plugged 3 back in C is higher than B, so B must be showing the Grid usage - Solar production.Per Smart Meter Guide 029 is Distributed Generation, so I've sent 36 kWh to the grid as of this morning. Not getting paid for this yet, the final step is for MP2 (utility company) to activate the net metering.I had a lot going on yesterday, so only dropped an email to Tesla about it. Have not yet heard back. I tried the 800 number today, but "office hours are..." so will try again on Monday. Attached thumbnail(s) http://atariage.com/forums/blog/148/entry-15804-solar-is-active/ Link to comment Share on other sites More sharing options...
Recommended Posts