ebiguy Posted March 15, 2020 Share Posted March 15, 2020 When I boot Super Archiver 3.03.atr (don't remember where it comes from), I have the following logs [Disk 1] Booting tool disk 'C:/Atari/800XL/SOFTS/ARCHIVER/ARCV3/The Super Archiver II 3.03.atr' first [Disk 1] Read Sector 1 ($001) #1 in track 0 ($00) [Disk 1] Read Sector 2 ($002) #2 in track 0 ($00) [Disk 1] Read Sector 3 ($003) #3 in track 0 ($00) [Disk 1] Read Sector 4 ($004) #4 in track 0 ($00) [Disk 1] Read Sector 5 ($005) #5 in track 0 ($00) [Disk 1] Read Sector 6 ($006) #6 in track 0 ($00) [Disk 1] Read Sector 7 ($007) #7 in track 0 ($00) [Disk 1] Read Sector 8 ($008) #8 in track 0 ($00) [Disk 1] Read Sector 9 ($009) #9 in track 0 ($00) [Disk 1] Read Sector 10 ($00a) #10 in track 0 ($00) [Disk 1] Read Sector 11 ($00b) #11 in track 0 ($00) [Disk 1] Read Sector 12 ($00c) #12 in track 0 ($00) [Disk 1] Read Sector 13 ($00d) #13 in track 0 ($00) [Disk 1] Read Sector 14 ($00e) #14 in track 0 ($00) [Disk 1] Read Sector 15 ($00f) #15 in track 0 ($00) [Disk 1] Read Sector 16 ($010) #16 in track 0 ($00) [Disk 1] Read Sector 17 ($011) #17 in track 0 ($00) [Disk 1] Read Sector 18 ($012) #18 in track 0 ($00) [Disk 1] Sending [COMMAND NAK] to Atari [Disk 1] command: $80, aux: $5400 NAKed. [Disk 1] Sending [COMMAND NAK] to Atari [Disk 1] command: $80, aux: $5400 NAKed. [Disk 1] Sending [COMMAND NAK] to Atari [Disk 1] command: $80, aux: $5400 NAKed. [Disk 1] Sending [COMMAND NAK] to Atari [Disk 1] command: $80, aux: $5400 NAKed. [Disk 1] Sending [COMMAND NAK] to Atari [Disk 1] command: $80, aux: $5400 NAKed. [Disk 1] Sending [COMMAND NAK] to Atari I don't know what Super Archiver is checking with this command $80. When looking at the Super Archiver code (not the Atari program but the Chip firmware), $80 is not supported. I was wondering if it was an attempt to detect if the drive is a Happy drive emulating The Chip. Any idea? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.