gilsaluki Posted September 24, 2020 Share Posted September 24, 2020 Just recapped my Lynx I. Now I need to perform the MosFET and Zenior Diode Remove & Replace (R2). The Console5 Kit I got has 5 or 6 pieces to it. I am now confused. What parts other than the MOSFET and Zenior Diode do I need to R2? Also, are there threads/Youtube links that show the process? Anyone have a good diagram of component locations (LYNX )? I have searched and come up empty, here and online. Quote Link to comment Share on other sites More sharing options...
bboy_h Posted September 24, 2020 Share Posted September 24, 2020 All the information is here in the description: https://console5.com/store/atari-lynx-1-2-voltage-regulator-rebuild-refresh-kit-with-power-jack.html The other parts are two transistors used as part of the switching on circuit (which are common to fail) - the resistor (from memory/reading) is not so important, but is lower the the original value to allow additional bias to turn on the transistors. The PCB silk screen overlay notes the component designators - YouTube is your friend also Quote Link to comment Share on other sites More sharing options...
Like us on Facebook
Follow us on Twitter
AtariAge on Instagram
Watch us on YouTube
Chat on Discord
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.