Elkino Posted February 2, 2021 Share Posted February 2, 2021 There is a procedure to do this? I want to run the the atari800 emulator on the PC and connect to the real FujiNet device (may be via bluetooth, network or using a SIO2USB cable) 1 Quote Link to comment Share on other sites More sharing options...
phigan Posted February 2, 2021 Share Posted February 2, 2021 Perhaps you could connect an FTDI (rs232 to usb) to the Fujinet's gnd/rx/tx/cmd and run atari800 with -rdevice <port name> option when USB is connected. You'd have to externally power it, I think. Fujinet in bluetooth mode is an SIO2PC client, essentially (doesn't do any network or SD card access in that mode), and I don't think you can do the SIO things over network. 1 Quote Link to comment Share on other sites More sharing options...
mozzwald Posted February 2, 2021 Share Posted February 2, 2021 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.