marauder666 Posted April 4, 2021 Share Posted April 4, 2021 Video mode keeps resetting back to NTSC after every cold boot. Font settings are ok. Working on another cart with 1.1 firmware. Tested on 7800 and 2600, same on both. Link to comment Share on other sites More sharing options...
Fierodoug5 Posted April 4, 2021 Share Posted April 4, 2021 hmmm, just tested on both my carts with 2.0.17 and they saved both Pal and Pal60 after multiple cold boots. Link to comment Share on other sites More sharing options...
+Al_Nafuur Posted April 4, 2021 Share Posted April 4, 2021 6 hours ago, marauder666 said: Video mode keeps resetting back to NTSC after every cold boot. Font settings are ok. Working on another cart with 1.1 firmware. Tested on 7800 and 2600, same on both. seems like the user settings eprom-emulation area has been messed up by one of the draft versions before v2.0.17. This might have happened while downloading offline ROMs with draft. We should add a new menu entry in "Setup" to erase the user setting flash area. For now you only can delete the flash sector 1 with the STM32CubeProgrammer: or re-flash the whole firmware. Link to comment Share on other sites More sharing options...
marauder666 Posted April 4, 2021 Author Share Posted April 4, 2021 I have been setting up offline roms for the last few weeks, so thats probably when it happened. Thanks. Link to comment Share on other sites More sharing options...
+Al_Nafuur Posted April 4, 2021 Share Posted April 4, 2021 1 hour ago, marauder666 said: I have been setting up offline roms for the last few weeks, so thats probably when it happened. Thanks. after you erased flash sector 1 with the STM32CubeProgrammer you have to use "Setup" -> "Search for Offline ROMs" to detect the downloaded Offline ROMs again. Link to comment Share on other sites More sharing options...
Like us on Facebook
Follow us on Twitter
AtariAge on Instagram
Watch us on YouTube
Chat on Discord
Recommended Posts