tane Posted August 27, 2021 Share Posted August 27, 2021 (edited) Hello! The authors of "River Raid On Mars" have asked to show a small preview of the game and the introduction prepared. It will not be in competition, for reasons explained at the end of the post, and either the project will be archived, completed or finished as it is. River Raid On Mars - Preview.mp4 Unfortunately some of the rules of the competition were misunderstood, it's not allowed to make hacks of third-party software, and also is not allowed to have official logos, like the Atari Fuji logo. Both are an essential part of this proposal in its conception, that's why this game has been retired from competition. The rule that was thought to allow to be in competition is the next one: 2.3 Also allowed are: 2.3.1 submission of an already existing program if it has been extended or altered. Finally, the aim of this post is not to make s discussion about the rules that certainly could be more clear, just to show a preview for those interested in new levels of this classic game, and the discussion of this thread should be in the already admitted entries. Bye! Edited August 27, 2021 by tane 3 Quote Link to comment https://forums.atariage.com/topic/319869-abbuc-software-contest-2021/page/2/#findComment-4894244 Share on other sites More sharing options...
_The Doctor__ Posted August 27, 2021 Share Posted August 27, 2021 Subbing out official logos etc makes sense (legal issues) the other point listed, I can see how the confusion could exist 2.3.1 submission of an already existing program if it has been extended or altered. Might be better as 2.3.1 submission of your original work already existing program if it has been extended or altered. though I am not sure how they reconcile this in the past with commercial softwares that were extended... unless permission was granted by whoever owned the IP Quote Link to comment https://forums.atariage.com/topic/319869-abbuc-software-contest-2021/page/2/#findComment-4894263 Share on other sites More sharing options...
holgibo Posted August 29, 2021 Author Share Posted August 29, 2021 Hello, another update to the contest, Date 24.8.21, 11 PM. checked and in contest: -Various (Game) / janzh -Brushup (Softwaretool-graphics) /Scott Hayes -Kowalskys Fury 2 / graphics and code: Kamil Trzaska (gorgh music: Michał Brzezicki Kooky Klimber 2021 / Anschuetz/Weisgerber/Anschuetz Robot Dungeon 2121 / Anschuetz/Weisgerber/Anschuetz Gacek (Game, Plattformer) / shanti77 CONTrollerTESTPRO (Testtool)/ Jakub Husak In checking status: - announced: 1 program (game) / popmilo 1 program (Softwaretool ) / Kaj de Vos Not in the contest: River Raid On Mars (Game) / MDA Software - Because it fits not the rules of the contest. If you are programming at this moment, please send me an e-mail or a PM. There are only a few days left in this year's contest. Remember the Date: 31.August 2021 ...Holger Quote Link to comment https://forums.atariage.com/topic/319869-abbuc-software-contest-2021/page/2/#findComment-4895133 Share on other sites More sharing options...
holgibo Posted August 29, 2021 Author Share Posted August 29, 2021 Please remember: There are only two days left! Deadline 31. August 2021. If you want to send an submission, just let me know. You can send me a PN here on AtariAge or en email at software@abbuc.de. ...Holger 1 Quote Link to comment https://forums.atariage.com/topic/319869-abbuc-software-contest-2021/page/2/#findComment-4895135 Share on other sites More sharing options...
popmilo Posted August 31, 2021 Share Posted August 31, 2021 So... Managed to finish my entry and send it It's a logic/arcade game called "Blokz". Inspired by Arcade (and console) game called "Quarth" or "Block Hole" outside Japan. Goal is to fill rectangular shapes, clear falling tetris like shapes from screen and progress as much as you can. Hope you'll like it Cheers! 11 1 Quote Link to comment https://forums.atariage.com/topic/319869-abbuc-software-contest-2021/page/2/#findComment-4896793 Share on other sites More sharing options...
matosimi Posted August 31, 2021 Share Posted August 31, 2021 Quite hectic but I managed to finish as well... Let me introduce Fallen Kingdom. Logical game with blue chess pieces trying to defeat red king. 12 Quote Link to comment https://forums.atariage.com/topic/319869-abbuc-software-contest-2021/page/2/#findComment-4896841 Share on other sites More sharing options...
holgibo Posted September 1, 2021 Author Share Posted September 1, 2021 Hello, another update to the contest, Date 1. September 2021. Now the deadline has come. No more new entries will be accepted. checked and in contest: -Various (Game) / janzh -Brushup (Softwaretool-graphics) /Scott Hayes -Kowalskys Fury 2 / graphics and code: Kamil Trzaska (gorgh music: Michał Brzezicki Kooky Klimber 2021 / Anschuetz/Weisgerber/Anschuetz Robot Dungeon 2121 / Anschuetz/Weisgerber/Anschuetz Gacek (Game, Plattformer) / shanti77 CONTrollerTESTPRO (Testtool)/ Jakub Husak In checking status: Blokz (game) / popmilo Meta (Softwaretool ) / Kaj de Vos Fallen Kingdom game) / matosimi Not in the contest: River Raid On Mars (Game) / MDA Software - Because it fits not the rules of the contest. ...Holger 3 Quote Link to comment https://forums.atariage.com/topic/319869-abbuc-software-contest-2021/page/2/#findComment-4897069 Share on other sites More sharing options...
holgibo Posted September 1, 2021 Author Share Posted September 1, 2021 Hello, another update to the contest, Date 1. September 2021, 4 PM. Now the deadline has come. No more new entries will be accepted. checked and in contest: -Various (Game) / janzh -Brushup (Softwaretool-graphics) /Scott Hayes -Kowalskys Fury 2 / graphics and code: Kamil Trzaska (gorgh music: Michał Brzezicki Kooky Klimber 2021 / Anschuetz/Weisgerber/Anschuetz Robot Dungeon 2121 / Anschuetz/Weisgerber/Anschuetz Gacek (Game, Plattformer) / shanti77 CONTrollerTESTPRO (Testtool)/ Jakub Husak Fallen Kingdom game) / matosimi Blokz (game) / popmilo In checking status: Meta (Softwaretool ) / Kaj de Vos Not in the contest: River Raid On Mars (Game) / MDA Software - Because it fits not the rules of the contest. ...Holger 1 3 Quote Link to comment https://forums.atariage.com/topic/319869-abbuc-software-contest-2021/page/2/#findComment-4897167 Share on other sites More sharing options...
matosimi Posted September 7, 2021 Share Posted September 7, 2021 (edited) Edited September 7, 2021 by matosimi 12 Quote Link to comment https://forums.atariage.com/topic/319869-abbuc-software-contest-2021/page/2/#findComment-4901236 Share on other sites More sharing options...
gorgh Posted September 8, 2021 Share Posted September 8, 2021 (edited) Dear ABBUC team, Could you tell us please when the games will be available for members as a digital download? My friend was asking me this question today. Thank you Edited September 8, 2021 by gorgh 1 Quote Link to comment https://forums.atariage.com/topic/319869-abbuc-software-contest-2021/page/2/#findComment-4901876 Share on other sites More sharing options...
gorgh Posted September 8, 2021 Share Posted September 8, 2021 Here's our entry 8 1 Quote Link to comment https://forums.atariage.com/topic/319869-abbuc-software-contest-2021/page/2/#findComment-4901892 Share on other sites More sharing options...
holgibo Posted September 8, 2021 Author Share Posted September 8, 2021 1 hour ago, gorgh said: Dear ABBUC team, Could you tell us please when the games will be available for members as a digital download? My friend was asking me this question today. Thank you Hi Kamil, I think this will be happen next week. Best regards, Holger 1 Quote Link to comment https://forums.atariage.com/topic/319869-abbuc-software-contest-2021/page/2/#findComment-4901895 Share on other sites More sharing options...
popmilo Posted September 9, 2021 Share Posted September 9, 2021 If someone missed my separate topic, here is Blokz. 12 Quote Link to comment https://forums.atariage.com/topic/319869-abbuc-software-contest-2021/page/2/#findComment-4902246 Share on other sites More sharing options...
shanti77 Posted September 9, 2021 Share Posted September 9, 2021 15 1 Quote Link to comment https://forums.atariage.com/topic/319869-abbuc-software-contest-2021/page/2/#findComment-4902442 Share on other sites More sharing options...
gorgh Posted September 9, 2021 Share Posted September 9, 2021 I guess we already have a winner 1 1 Quote Link to comment https://forums.atariage.com/topic/319869-abbuc-software-contest-2021/page/2/#findComment-4902481 Share on other sites More sharing options...
rra Posted September 9, 2021 Share Posted September 9, 2021 Here is a video of Kooky Klimber 2021 from the A/W/A team. 11 Quote Link to comment https://forums.atariage.com/topic/319869-abbuc-software-contest-2021/page/2/#findComment-4902689 Share on other sites More sharing options...
rra Posted September 9, 2021 Share Posted September 9, 2021 Here is a video of Robot Dungeon 2121 from the A/W/A team. 13 Quote Link to comment https://forums.atariage.com/topic/319869-abbuc-software-contest-2021/page/2/#findComment-4902690 Share on other sites More sharing options...
+DjayBee Posted September 19, 2021 Share Posted September 19, 2021 A hint to members who want to try out BrushUp (on disk C) and own an AVGCART: BrushUp needs BASIC XE 4.1 to work which probably only a few people own as a real cartdrige. AVG can simultaneously load a CAR and disk images, but only if all files are in the same directory of the SD card. First assign the disk image to disk drive D1 by pressing SHIFT-1, then select the CAR file and press RETURN to boot the computer. This does not work if you need to change the directory of the SD card in between. tmp just now gave a workaround: If you define a shortcut for the CAR, both files can be in different directories. In this case use also SHIFT-1 to assign the ATR to the virtual floppy but then just press the defined shortcut of the CAR. 1 1 Quote Link to comment https://forums.atariage.com/topic/319869-abbuc-software-contest-2021/page/2/#findComment-4908021 Share on other sites More sharing options...
Yautja Posted September 19, 2021 Share Posted September 19, 2021 Video of «Varius», by Holger "janzh" Janz. Credit: Saberman. 2 Quote Link to comment https://forums.atariage.com/topic/319869-abbuc-software-contest-2021/page/2/#findComment-4908332 Share on other sites More sharing options...
adam242 Posted September 20, 2021 Share Posted September 20, 2021 3 hours ago, Yautja said: Video of «Varius», by Holger "janzh" Janz. Credit: Saberman. Somebody's been playing Quarrion.. ? Quote Link to comment https://forums.atariage.com/topic/319869-abbuc-software-contest-2021/page/2/#findComment-4908445 Share on other sites More sharing options...
matosimi Posted September 20, 2021 Share Posted September 20, 2021 5 hours ago, adam242 said: Somebody's been playing Quarrion.. ? I think it is closer to 2048 , but thanks for advertising . On 9/10/2021 at 1:39 AM, rra said: Here is a video of Kooky Klimber 2021 from the A/W/A team. This reminds me Spiderman from 2600 On 9/10/2021 at 1:39 AM, rra said: Here is a video of Robot Dungeon 2121 from the A/W/A team. I'm having an idea of (kind of) similar game in my mind for several years, but I could not start working on it due to lot of technical obstacles/decisions for the design and gameplay. I really like the way how robots are moving 1 by 1 in kind of turn-based manner... that's really nice solution. I'm looking forward to try this game. 2 Quote Link to comment https://forums.atariage.com/topic/319869-abbuc-software-contest-2021/page/2/#findComment-4908569 Share on other sites More sharing options...
rsh Posted September 30, 2021 Share Posted September 30, 2021 (edited) Brush-Up ... Here are some screen shots and simple summary: Feature Summary * Built-in Help. Use HELP key within the program. Help screens have been added below for documentation reference. * Edit, Load, Save pictures * Search File(s) on disks feature. * Brushup stores a brushup.cfg file on main disk that captures last edit picture and location. Upon launch of the program at later time it will attempt to load the last edited picture automatically. * Supports all Gr. Modes (non text) * Drawing brushes has 94 unique built in. When using the screen draw mode. * Action Tools (Dup,Cut,Paste,Erase (Toggle),Line Connect,Paint Fill,Color Finder * Draw Tools (10 major Shapes) Rectangle, Circle, Triangle, Diamond, Diamond2, Hexagon, Angles L/R, Star, Trapazoid, Corners * Color Picker (palette) * Sprite Mode is a special mode where you can capture a sprite from the screen and store up to 40 sprites. Each sprite can be 40 lines high. After capturing a sprite you can manipulate (inverse,flip horz or vertical, move left/right/up/down, copy merge into another sprite bucket), animate, and generate code. (see: Sprite mode Keys help below). * Sprite animation is possible to animate 40 frames. You will need to add a captured sprite to a Frame with Shft+G and select the next sprite and add it to the next Frame. Then turn on animation (shft+A) pressing shft+A again will increase the animation speed. Shft+Z will end animation mode. Note: you can add the same sprite to multiple frames to simulate a delay. Shft+V removes a frame. * Sprite Code Gen to Display or Disk in (Basic,Action!,ASM,Rput) * Menu <tab>, and quick key support. Press left arrow to close the tab screen or pick something with enter. * Customize Brush quick keys. Using Ctrl+# to program a brush number quick reference. * Undo/Redo (only last buffer) * Picture header support & defined * Customize edit/picture limits. Can define the edit area and save size of an image so an entire 7680 screen need not be stored on file. Useful for small screen size images. Requirements 1) Basic XE 4.1 w/ext v4.11 2) LOMEM 7424 (must be set) 3) 128K memory required 4) Please read the built-in HELP (a lot of features, quick keys) Execution Autorun.sys will launch correctly if Basic XE CART is available. OSS ext v4.11 already on Brushupv40.atr disk OR Command line: 1) Load your Basic XE version w/ext. 2) Mount Brushupv40.atr disk 3) LOMEM 7424:ENTER "D:BRUSHUP.LDR" Help Screens: Screen Edit (Main Quick Keys) START - Main Menu SELECT - CoLor Palette/Sprite Code Gen OPTION - Graphics Mode Settings HELP - Help Screen TAB - Edit Menu (Toggle) SPACE - X/Y Toggle (Slows movement) ESC - Quit Menu/Tool goto Draw Mode RETURN - Select Menu/Item or Draw ARROWS - Menu/Pixel/Draw Shft/+Ctrl -------- Action Tool Quick Keys E: Erase (Toggle) K: Line Connect P: Paint Fill C; Cut/Paste D; Duplicate/Paste F: Color Finder Draw Tool Keys Ctrl+R: Rectangle Ctrl+C: Circle Ctrl+T: Triangle Ctrl+D: Diamond Ctrl+F: Diamond2 Ctrl+H: Hexagon Ctrl+A: Angles L/R Ctrl+S: Star Ctrl+Z: Trapazoid Ctrl+K: Corners --------- Brush & Color Quick Keys [1 - 0]: Brush [1 - 10] Menu Ctrl[2 - 0]: Brush Slot [2 - 10] < or >: Brush prev / next Ctrl+[2 - 0]: Color [1 - 9] Ctrl+< or >: Color prev / next Special Actions Keys S:Sprite Mode Bksp(Shft):Undo(Redo) Q:Save (Reset Undo) Shft+Q:Save Disk ---------- Sprite Mode Generate/Animate from Screen Image Store 40 Sprites Max Height 40 Quick Keys Shft+<key below> M: Mode Pixels not match color [C] Pixels match color N/J: Next/Prev C: ClrCopy T: FlipHrz X/D: Ins/Del F: PasteMrge Y: FlipVrt B/H: Adj Up/Dn R: Inverse U/I: Adj L/R Animate A/Z: OnSpd+/Off G/V: Frame +/- ----------- File Header Types BU1: <Typ><Hdr Dec><PData> BU2: <Typ><Hdr Hex><PData> BU3: <Typ><PSz><PData> BU4: <PSz><Set. 0-3><PData> (v3) N/A: <PData> <Typ> = <2 bytes><3 bytes> RPUT <Hdr> = <2 bytes><100 bytes> RPUT <PSz> = <1 byte ><(n) bytes> RPUT <PData> = <(n) bytes image data> BPUT ----------- Hdr (100 bytes) Detail <Gr|PSz|Bpl|eSt|eSp|sSt|sSp|Cn|Cn...|> Gr = GraphicsMode PSz = PicSizeBytes Bpl = BytesPerLine eSt = EditStartRow eSp = EditStopRow sSt = SaveStartRow sSp = SaveStopRow Cn = Color 1-(n) (Based On Gr. Mode) Final Notes 1) Gr.10 will not see color/edit icons Use menus<tab>,Sprite Mode <SELECT> 2) Palette has a flicker (VBI delay) 3) Cut/Paste will not allow undo/redo 4) Gr.8 brushes wider than pixels 5) Search finds 1st 40 matches of 999 6) BkSp twice will clear the undo buffer 7) It's BASIC after all. Runs well, may see speed issues w/ large actions of (Dup,Fill,Circle,etc.) 9) Action! port is likely. Fun Proj. Edited September 30, 2021 by rsh 5 1 Quote Link to comment https://forums.atariage.com/topic/319869-abbuc-software-contest-2021/page/2/#findComment-4914967 Share on other sites More sharing options...
holgibo Posted September 30, 2021 Author Share Posted September 30, 2021 Now the last program has been checked, here is the contest list: Various (Game) / janzh Brushup (Softwaretool-graphics) /Scott Hayes Kowalskys Fury 2 / graphics and code: Kamil Trzaska (gorgh music: Michał Brzezicki Kooky Klimber 2021 / Anschuetz/Weisgerber/Anschuetz Robot Dungeon 2121 / Anschuetz/Weisgerber/Anschuetz Gacek (Game, Plattformer) / shanti77 CONTrollerTESTPRO (Testtool)/ Jakub Husak Fallen Kingdom game) / matosimi Blokz (game) / popmilo Atari 8bit remote commandline interface for the Meta programming language compiler server (Softwaretool ) / Kaj de Vos 1 Quote Link to comment https://forums.atariage.com/topic/319869-abbuc-software-contest-2021/page/2/#findComment-4915061 Share on other sites More sharing options...
holgibo Posted September 30, 2021 Author Share Posted September 30, 2021 ABBUC members are now invited to check the programs and give their voting. Please visit abbuc.de and the abbuc forum for more details. Registered ABBUC members can download the programs in the members section on abbuc.de. 1 Quote Link to comment https://forums.atariage.com/topic/319869-abbuc-software-contest-2021/page/2/#findComment-4915066 Share on other sites More sharing options...
+MrFish Posted October 10, 2021 Share Posted October 10, 2021 On 9/30/2021 at 3:44 PM, holgibo said: Atari 8bit remote commandline interface for the Meta programming language compiler server (Softwaretool ) / Kaj de Vos I'm sorry, but the title for this contest entry isn't descriptive enough. 1 Quote Link to comment https://forums.atariage.com/topic/319869-abbuc-software-contest-2021/page/2/#findComment-4921170 Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.