Jump to content
IGNORED

First successful boot of #Apple2 #FujiNet!!!


tschak909

Recommended Posts

  • 8 months later...
8 hours ago, macsonny said:

Anyone know the status of this activity? I'm interested in purchasing a unit but there seems to be little information about anyone selling?

If you're not familiar with FujiNet, it is completely developed in the open, and sold via vendors in the given community. Even though there aren't units being sold yet, there is considerable development happening. If you want to help out, join the FujiNet Discord!

https://discord.gg/7MfFTvD

 

-Thom

 

Link to comment
Share on other sites

15 hours ago, macsonny said:

Anyone know the status of this activity? I'm interested in purchasing a unit but there seems to be little information about anyone selling?

 

I received an Apple2c and an Apple2gs

 

Next week my first manufactured batch of FujiApple will be ready :)

 

 

Edited by masteries
Link to comment
Share on other sites

20 hours ago, macsonny said:

Anyone know the status of this activity? I'm interested in purchasing a unit but there seems to be little information about anyone selling?

I have a couple left at https://fujinet.online/shop/appleii/fujiapple-rev-0/

5 hours ago, masteries said:

Next week my first manufactured batch of FujiApple will be ready

New design or the Rev 0 board?

Link to comment
Share on other sites

  • 1 month later...
  • 1 month later...

 

@tschak909 @mozzwald

 

Something rare found by some users at their Apple IIc ,

solution comes from a french user:

 

 

Original message:

 

Hello

Je suis parvenu à utiliser votre matériel

Mais en cherchant beaucoup.

En fait sur mon IIc pour lancer un programme depuis internet ,
je dois taper « esc » et en même temps «  ctrl + pomme + reset »

D’où « esc » seul ne lance pas de boot

 


------------------------------------------------

 

Translation


Hello

I managed to use your material

But looking for a lot.

In fact on my IIc to launch a program from the internet,
I have to type "esc" and at the same time "ctrl + apple + reset"

Hence "esc" alone does not launch boot

 

 

 

 

It also happens in american Apple IIc, not all, but some of them.

 

Hopefully, solution is easy :)

 

 

 

 

Edited by masteries
Link to comment
Share on other sites

2 minutes ago, masteries said:

 

@tschak909 @mozzwald

 

Something rare found by some users at their Apple IIc ,

solution comes from a french user:

 

 

Original message:

 

Hello

Je suis parvenu à utiliser votre matériel

Mais en cherchant beaucoup.

En fait sur mon IIc pour lancer un programme depuis internet ,
je dois taper « esc » et en même temps «  ctrl + pomme + reset »

D’où « esc » seul ne lance pas de boot

 


------------------------------------------------

 

Translation


Hello

I managed to use your material

But looking for a lot.

In fact on my IIc to launch a program from the internet,
I have to type "esc" and at the same time "ctrl + apple + reset"

Hence "esc" alone does not launch boot

 

 

 

 

It also happens in american Apple IIc, not all, but some of them.

 

Hopefully, solution is easy :)

 

 

 

 

Please use the latest code, as we've merged a totally new way to communicate with the smartport.

-Thom

  • Like 1
Link to comment
Share on other sites

Just now, masteries said:

I´ll report the affected users,

 

Thanks!

 

It must be pointed out, that we haven't officially released the first version of the production firmware, so anyone who wants to help really needs to follow the instructions here to set up an environment to flash the latest firmware, and report debug messages:

https://github.com/FujiNetWIFI/fujinet-platformio/wiki/Board-Bring-Up-Software

 

Link to comment
Share on other sites

Just received my board and am very happy to start testing. Updated to latest firmware after it was hanging scanning my wifi network. Now it no longer hangs,  but it finds multiple identical 2.4ghz ssids for which my network only has one,  and then doesn't register my password. After saying Connecting to Network it goes back to Scanning. Hidden SSID does nothing when selected. 

 

Is there a way to manually enter network info,  possibly over a serial connection? 

Link to comment
Share on other sites

8 hours ago, Solitaire01 said:

Just received my board and am very happy to start testing. Updated to latest firmware after it was hanging scanning my wifi network. Now it no longer hangs,  but it finds multiple identical 2.4ghz ssids for which my network only has one,  and then doesn't register my password. After saying Connecting to Network it goes back to Scanning. Hidden SSID does nothing when selected. 

 

Is there a way to manually enter network info,  possibly over a serial connection? 

In my FAT32 micro SD card, shared for all Fujinet versions,

the WiFi information is stored in a file called "fnconfig.ini"

 

[WiFi]
enabled=1
SSID=
passphrase=

 

Can your network router create multiple instances of the same SSID, one per available channel?

(Is this possible?)

 

As well, some routers create multiple instances with the same name, one per each available frequency, such 2.4 GHz and 5 GHz

or mixed 2.4 GHz - 5 GHz, these last ones are not suitable for ESP32

 

Personally, I found problems when there are several dozens of 2.4 GHz SSID, this is not rare,

when there are 80+ 2.4 GHz networks, none of them barely works ok  xD

 

 

 

Edited by masteries
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...