Dopy25 Posted February 15, 2022 Share Posted February 15, 2022 (edited) Want #1: Gamecube power or video. Looking for stuff that either doesn't work or could use some love. Shoot me a message if you have any gamecube stuff you'd want to offload. Want #2: Looking for a channel F BIOS chip. Looking for SL90026 or SL31253 and SL31254 I believe my console has a bad PSU (program storage unit). I guess this is the bios as well? Anyone have any spares? Or a busted Fairchild channel f console? I don't really want to buy one on eBay because most sellers think it's a gold mine even if it's broken. If you have a system 1 revision E, that's preferred but I am looking for anything with those chips. Want #3: game case for Crazy Taxi on GC. I have the game disc, manual, and insert, but no case or cover art. Want #4: ANY controller plug ends, even if they are frayed a little, as long as the fray is more than a few inches from the plug base. I have a blue retro base and a bunch of connectors, but no controller ends. I am hoping someone has some here that they would like to let me repurpose. Preferred: Sega: Genesis, Dreamcast, Saturn Nintendo: NES and Famicom(even though famicom has hardwired controllers is ok), SNES, N64, Gamecube Atari: 5200 (2600/7800 are good too, but covered under sega genesis since all wires are populated) Sony Playstation/PS2 PC Engine or TG16 I have a bunch of stuff here and would love to trade. If you don't see anything you like, please let me know what you're looking for and I might have it in my own collection. See my sale thread for interested trades or send a PM. Edited February 22 by Dopy25 Quote Link to comment Share on other sites More sharing options...
Leonard Smith Posted February 16, 2022 Share Posted February 16, 2022 Not sure if this helps, but I just saw this pop up on my Facebook Marketplace. Full disclosure, this is not my listing. https://www.facebook.com/marketplace/item/288564376709666/ 1 Quote Link to comment Share on other sites More sharing options...
Dopy25 Posted February 16, 2022 Author Share Posted February 16, 2022 (edited) 50 minutes ago, Leonard Smith said: Not sure if this helps, but I just saw this pop up on my Facebook Marketplace. Full disclosure, this is not my listing. https://www.facebook.com/marketplace/item/288564376709666/ That's decent for sure, but the one I have almost looks as good. haha. It feels like a waste not using it. This is the one I have: Edited February 16, 2022 by Dopy25 1 Quote Link to comment Share on other sites More sharing options...
+-^CrossBow^- Posted February 16, 2022 Share Posted February 16, 2022 I might have a spare working console only but will have to check. I also believe it is in really good condition overall but no controllers as it would be just the console itself. Could also look into having your current one looked at to see if it can be fixed? Quote Link to comment Share on other sites More sharing options...
Dopy25 Posted February 16, 2022 Author Share Posted February 16, 2022 (edited) 2 hours ago, -^CrossBow^- said: I might have a spare working console only but will have to check. I also believe it is in really good condition overall but no controllers as it would be just the console itself. Could also look into having your current one looked at to see if it can be fixed? I reflowed a few of the solder joints and tried again. No change. The screen is black but has random vertical lines flashing and after it warms up, there are colored lines as well. PXL_20220216_193624078.TS.mp4 I also only have 2 games that I'm not sure even work but I cleaned them and the cart slot. None of the caps on board look expanded. The stic looks like it might have a crack in it but from what I understand, something should come up on screen, albeit garbage video, but video nonetheless. I can't call what I see on screen video. I'm wondering if it's the CPU. It looks just like what's on screen when a 2600 CPU is bad. I'm really hoping to come up with something I can use to test the chips in my board. I don't have an oscilloscope so I'm limited on what I can do. I usually check what my gut says first, and my gut is telling me this has a bad CPU, maybe stic. I'm not sure if the video is playing so I uploaded it: https://photos.app.goo.gl/NEBPcDZXAAV2gipV8 Edited February 16, 2022 by Dopy25 Quote Link to comment Share on other sites More sharing options...
Dopy25 Posted March 4, 2022 Author Share Posted March 4, 2022 bump. found a 3do but need a controller, or controller parts. Quote Link to comment Share on other sites More sharing options...
Wing_Commander Posted March 4, 2022 Share Posted March 4, 2022 (edited) 7 hours ago, Dopy25 said: bump. found a 3do but need a controller, or controller parts. You need a new or used one? I can provide both.. Edit.. I have just new ones... Just tested my spare used controller I haven't used in years and it doesn't work... So I have some new ProPads, about 4 of them. When I get home I will upload photos.. Edited March 4, 2022 by Wing_Commander 1 Quote Link to comment Share on other sites More sharing options...
Wing_Commander Posted March 4, 2022 Share Posted March 4, 2022 $35 + shipping. 1 Quote Link to comment Share on other sites More sharing options...
Dopy25 Posted March 4, 2022 Author Share Posted March 4, 2022 Appreciate the offer @Wing_Commander But I would prefer something used. I've never been a fan of new things or their prices, even todays video games. What's going on with the used one? Do any of the buttons respond? What about if you press harder, or longer? I'm wondering if it's the conductive pads. If those are bad, I could always use it for a pad hack which is my initial goal. I've borrowed a controller for now to test the console, but it feels really weird. Especially for Street Fighter. haha. That's why I'd like to make an arcade stick by creating a pad hack. I have another 3do controller I bought awhile back but someone completely raged out on it and bent the board inside somehow. The traces are completely shot. I am sure the chips may still work, but creating that from scratch would be quite difficult. I can solder pretty well, but these controllers have some weird things going on in them. Plus I haven't seen a decent diagram that would tell me what to do with the chips, capacitors, and resistors. Quote Link to comment Share on other sites More sharing options...
Wing_Commander Posted March 5, 2022 Share Posted March 5, 2022 13 hours ago, Dopy25 said: Appreciate the offer @Wing_Commander But I would prefer something used. I've never been a fan of new things or their prices, even todays video games. What's going on with the used one? Do any of the buttons respond? What about if you press harder, or longer? I'm wondering if it's the conductive pads. If those are bad, I could always use it for a pad hack which is my initial goal. I've borrowed a controller for now to test the console, but it feels really weird. Especially for Street Fighter. haha. That's why I'd like to make an arcade stick by creating a pad hack. I have another 3do controller I bought awhile back but someone completely raged out on it and bent the board inside somehow. The traces are completely shot. I am sure the chips may still work, but creating that from scratch would be quite difficult. I can solder pretty well, but these controllers have some weird things going on in them. Plus I haven't seen a decent diagram that would tell me what to do with the chips, capacitors, and resistors. Its an old Goldstar pad... Though I might be my 3DO because my other one isn't working now either... Nor is my flight stick ... I have yet to get this FZ1 recapped... So the controller might actually be fine. I will send you a photo later today of it. Might just ask 10 +shipping for it. 1 Quote Link to comment Share on other sites More sharing options...
Dopy25 Posted March 7, 2022 Author Share Posted March 7, 2022 I have my 3do controller situation taken care of. Still looking for a "mostly" functioning INTV2 board Quote Link to comment Share on other sites More sharing options...
Dopy25 Posted May 25, 2022 Author Share Posted May 25, 2022 INTV2 is also taken care of. Now I would like to fix the joystick adjustment so I am looking to borrow or purchase unused goods if you have it. Or if anyone has the ability to burn the test cart rom for me (if that's allowed), I would appreciate it. I don't need a shell. I just need the board. If you have any other ways I could get a test cart, please reach out. Quote Link to comment Share on other sites More sharing options...
Dopy25 Posted August 30, 2022 Author Share Posted August 30, 2022 New want Quote Link to comment Share on other sites More sharing options...
Dopy25 Posted August 30, 2022 Author Share Posted August 30, 2022 No longer need ST RAM. Quote Link to comment Share on other sites More sharing options...
Dopy25 Posted October 8, 2022 Author Share Posted October 8, 2022 New want Quote Link to comment Share on other sites More sharing options...
Dopy25 Posted October 27, 2022 Author Share Posted October 27, 2022 New want. Would love to make a trade. Quote Link to comment Share on other sites More sharing options...
Dopy25 Posted November 3, 2022 Author Share Posted November 3, 2022 New want. Thanks in advance Quote Link to comment Share on other sites More sharing options...
Dopy25 Posted November 5, 2022 Author Share Posted November 5, 2022 Also looking for BIOS chip for a channel f. I'm about 99% sure that's the problem I have. Quote Link to comment Share on other sites More sharing options...
Dopy25 Posted November 20, 2022 Author Share Posted November 20, 2022 Added want. Looking for a Sega CD model 2 PSU. Quote Link to comment Share on other sites More sharing options...
Dopy25 Posted December 15, 2022 Author Share Posted December 15, 2022 Updated want. Take a look at the OP if you have any trashed cables for pretty much any console. Quote Link to comment Share on other sites More sharing options...
Dopy25 Posted December 27, 2022 Author Share Posted December 27, 2022 New want added. Anyone have gamecube stuff they want to save from the trash heap? I would love to be your guy. Quote Link to comment Share on other sites More sharing options...
Dopy25 Posted January 22 Author Share Posted January 22 Bump. Desperately in need of a parts GameCube. I have a cube that's missing the bottom metal shield. Not sure how it went missing but I could use one right now. If you have that part for some reason, or have a spare, even busted up, trash cube, please let me know. I can buy the shield alone for $12 on eBay but I'm hoping someone here has one, or a console they no longer want. Quote Link to comment Share on other sites More sharing options...
Dopy25 Posted February 22 Author Share Posted February 22 Looking for power supply for GameCube. Have any extras you don't need? Just the console connector would help if you have any broken supplies. Quote Link to comment Share on other sites More sharing options...
Like us on Facebook
Follow us on Twitter
AtariAge on Instagram
Watch us on YouTube
Chat on Discord
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.