rietveld Posted March 4, 2022 Share Posted March 4, 2022 (edited) Edited March 4, 2022 by rietveld Quote Link to comment Share on other sites More sharing options...
rietveld Posted August 25, 2022 Author Share Posted August 25, 2022 Not super sexy but very functional 1 Quote Link to comment Share on other sites More sharing options...
+mytek Posted September 22, 2022 Share Posted September 22, 2022 Actually that makes very good use of a normally unused space. I was just thinking that maybe a 3D printed replacement for the door with just the right cutout for the display, and maybe some 3D printed key caps for the buttons would take this to the next level. Quote Link to comment Share on other sites More sharing options...
rietveld Posted October 30, 2022 Author Share Posted October 30, 2022 (edited) Big thanks to Chris Tersteeg I used his 3d print and made this case for my ADE It only tool 4 hours to print overnight Edited October 30, 2022 by rietveld 1 Quote Link to comment Share on other sites More sharing options...
hideehoo Posted October 30, 2022 Share Posted October 30, 2022 Thanks rietveld, for others that have also built my board there is now a proper case available at https://github.com/djtersteegc/coleco-adam-ade-pro-shield or https://www.thingiverse.com/thing:5593280. Make sure to pick the right body file depending on if you are using the reference Mega 2560 design or one of the Chinese CH340 clones. The ports are are in slightly different locations between the two. Quote Link to comment Share on other sites More sharing options...
rietveld Posted October 31, 2022 Author Share Posted October 31, 2022 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.