atarilux Posted April 23, 2022 Share Posted April 23, 2022 Hello, I recently bought a 7800 (European, German adaptor). It powers on ok, however no image is displayed on the TV. I previously plugged in an XL to the same TV port and it works fine. However, there is literally no output on the 7800. Am I missing something? Any help appreciated. Quote Link to comment Share on other sites More sharing options...
+karri Posted April 23, 2022 Share Posted April 23, 2022 I also got a 7800 from Germany a while ago. The automatic channel recognition did not work. But choosing manual analog channel tuning and tapping in 055.75 MHz produced a coloured screen. Quote Link to comment Share on other sites More sharing options...
atarilux Posted April 23, 2022 Author Share Posted April 23, 2022 Thanks, will give that a try. Quote Link to comment Share on other sites More sharing options...
atarilux Posted April 24, 2022 Author Share Posted April 24, 2022 Still no luck sadly. What is the switch neat to the antenna on the console for? I have moved that around, also with no luck Quote Link to comment Share on other sites More sharing options...
atarilux Posted May 21, 2022 Author Share Posted May 21, 2022 Any tips on how to get it working? It is still sitting in a box. I would prefer not to mod it. Quote Link to comment Share on other sites More sharing options...
mimo Posted May 22, 2022 Share Posted May 22, 2022 Could you post some pictures, as far as I know there is no switch on the rear of a pal 7800 Quote Link to comment Share on other sites More sharing options...
alex_79 Posted May 22, 2022 Share Posted May 22, 2022 PAL-B models (continental Europe) have the switch, PAL-I ones (UK and Ireland) don't. The same applies to 2600 consoles. Quote Link to comment Share on other sites More sharing options...
mimo Posted May 22, 2022 Share Posted May 22, 2022 7 minutes ago, alex_79 said: PAL-B models (continental Europe) have the switch, PAL-I ones (UK and Ireland) don't. The same applies to 2600 consoles. Ah, you learn something new every day. Thanks Quote Link to comment Share on other sites More sharing options...
atarilux Posted May 22, 2022 Author Share Posted May 22, 2022 (edited) Thanks to everyone for your help, following the comments above I tried it again and flicked the switch at the back, it found the console and it works fine now. I just need to fine tune it. While I got six games with it, two don't work and the rest are terrible. But I look forward to finding out what is good. Edited May 22, 2022 by atarilux Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.