Zoyx Posted January 22, 2023 Share Posted January 22, 2023 I have an A/V modded Junior. Only producing black & white video. Otherwise the picture looks great. The color/B&W switch works, but it just changes the grey shading. I've tried multiple TVs/displays. I turned the 500k trimmer pot, but it had no effect. Any ideas on getting color back? Quote Link to comment Share on other sites More sharing options...
+x=usr(1536) Posted January 23, 2023 Share Posted January 23, 2023 Check continuity between pins 2 (sync) and 9 (colour) on the TIA and the Longhorn board. 1 Quote Link to comment Share on other sites More sharing options...
Zoyx Posted December 27, 2023 Author Share Posted December 27, 2023 (edited) It has been a year, but I finally got around to fixing this. The problem was the 500k trimmer pot. I bought a new one from this link. I desoldered the old one and plugged this one in. The new one was slightly bigger, so some minor bending, and it was in. Resoldered, then I had to do some dialing-in with a small screwdriver while it was running. I used Frogger for the fine-tuning. Edited December 27, 2023 by Zoyx Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.