shear_xear Posted May 24, 2023 Share Posted May 24, 2023 Hi everyone. I have an NES top loader, and it gets power, is getting 13v (which seems to be high) at the 1500uf cap and the switch, but no power is getting to the power regulator. I replaced the power regulator and 1500uf cap with no change. Any ideas what could be keeping this from powering up? Thanks! Quote Link to comment Share on other sites More sharing options...
Memblers Posted June 3, 2023 Share Posted June 3, 2023 Any luck? Maybe the power switch has a problem. The unregulated power should pass through it. 13V would be normal from a 9V transformer, when there is no load. It also passes through a bridge rectifier, but that's before the capacitor, so maybe that part is OK. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.