Jess Ragan Posted September 11, 2007 Share Posted September 11, 2007 What's a good, fairly inexpensive plastic box I could use to house a homemade controller adapter? As it is right now, my adapter is just a bundle of wires and ports... it's just too fragile to use on a regular basis. I've tried using a 5200 cartridge shell, but had immense difficulty opening it and drilling the holes for the ports. Quote Link to comment Share on other sites More sharing options...
Lord Thag Posted September 11, 2007 Share Posted September 11, 2007 Radio Shack usually has a nice variety of plastic 'project' boxes of all sizes. They look nice, and I've used them for several projects over the years. Quote Link to comment Share on other sites More sharing options...
Prodos8 Posted September 11, 2007 Share Posted September 11, 2007 (edited) The 2x3x1 inch radio shack project box had done wonders for me. all I did in the did the edit was put an 'x' no kidding. Edited September 11, 2007 by Prodos8 Quote Link to comment Share on other sites More sharing options...
mimo Posted September 11, 2007 Share Posted September 11, 2007 Have you got kids? Have they got Leggo Quote Link to comment Share on other sites More sharing options...
Bryan Posted September 11, 2007 Share Posted September 11, 2007 Here's two manufacturers of enclosures: www.pactecenclosures.com www.serpac.com Quote Link to comment Share on other sites More sharing options...
Jess Ragan Posted September 11, 2007 Author Share Posted September 11, 2007 Thanks, guys! I'm thinking of ordering a few boxes from BG Micro. I've also considered picking up a few of these bad boys... http://www.bgmicro.com/index.asp?PageActio...mp;ProdID=10843 Yeah, I think you know where I'm going with this. The pinout is in rows and columns, making setup a breeze, and there's sixteen buttons, more than enough to replace that blasted 5200 keypad once and for all! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.