froggger2 Posted March 9, 2009 Share Posted March 9, 2009 Al, I have six from the list. You can have them and I will pay for the shipping. Please PM me your shipping address. I appreciate your efforts that make AtariAge available for us to use. Quote Link to comment Share on other sites More sharing options...
Albert Posted March 9, 2009 Author Share Posted March 9, 2009 Can the carts be PAL or must they be NTSC? Does it matter if the carts are the variety that have rectangular holes in the upper corners of the front of the cart? Yep, PAL carts and carts with the holes under the main label are both fine. Thanks! ..Al Quote Link to comment Share on other sites More sharing options...
+Nathan Strum Posted March 9, 2009 Share Posted March 9, 2009 Have you considered contacting Best Electronics, and see if you could swing some bulk deal on loose carts? Quote Link to comment Share on other sites More sharing options...
Deteacher Posted March 12, 2009 Share Posted March 12, 2009 (edited) Al, Have you hit your target yet? How many super-chips have you acquired so far? I feel good knowing I was able to contribute to the pile (even if it was only 1.) Edited March 12, 2009 by Deteacher Quote Link to comment Share on other sites More sharing options...
+selgus Posted March 19, 2009 Share Posted March 19, 2009 There is a chip that could be used which would include bank-switching, RAM, and ROM all within a single inexpensive chip, but it's only available in surface-mount. The latter chip will probably be used for 2600 carts in the future, but that design isn't finalized yet. What chip were you talking about here? Thanks. --Selgus Quote Link to comment Share on other sites More sharing options...
Albert Posted March 19, 2009 Author Share Posted March 19, 2009 Al, Have you hit your target yet? How many super-chips have you acquired so far? I feel good knowing I was able to contribute to the pile (even if it was only 1.) I'm up to about 80 carts now. Still need about 20 carts. ..Al Quote Link to comment Share on other sites More sharing options...
+batari Posted March 19, 2009 Share Posted March 19, 2009 There is a chip that could be used which would include bank-switching, RAM, and ROM all within a single inexpensive chip, but it's only available in surface-mount. The latter chip will probably be used for 2600 carts in the future, but that design isn't finalized yet. What chip were you talking about here? Thanks. --Selgus The same chip that powers the Harmony boards. Quote Link to comment Share on other sites More sharing options...
+selgus Posted March 22, 2009 Share Posted March 22, 2009 There is a chip that could be used which would include bank-switching, RAM, and ROM all within a single inexpensive chip, but it's only available in surface-mount. The latter chip will probably be used for 2600 carts in the future, but that design isn't finalized yet. What chip were you talking about here? Thanks. --Selgus The same chip that powers the Harmony boards. Hmm, at ~$3 per chip, this might make a good candidate for making RAM PLUS type games, or maybe even more RAM banks. --Selgus Quote Link to comment Share on other sites More sharing options...
Byte Knight Posted March 23, 2009 Share Posted March 23, 2009 Al, I've got a Crystal Castles to contribute.. Do you need any non-superchip games? Quote Link to comment Share on other sites More sharing options...
Albert Posted March 30, 2009 Author Share Posted March 30, 2009 I should be good for SuperChip carts now--thanks to everyone who sent some in!! ..Al Quote Link to comment Share on other sites More sharing options...
jan711 Posted September 23, 2022 Share Posted September 23, 2022 On 25.1.2009 at 01:57, CPUWIZ said: Gern geschehen. Future Cave In Teilen: Is this PCB still available for purchase somewhere? I need three of these? thanks Quote Link to comment Share on other sites More sharing options...
maddigor2 Posted November 28, 2023 Share Posted November 28, 2023 On 9/23/2022 at 4:14 PM, jan711 said: Is this PCB still available for purchase somewhere? I need three of these? thanks I would also like to get a few for a project. Just acquired a few super football carts for a project. I would also be fine with getting the cad files and having some produced. @CPUWIZ @Albert -Matt Quote Link to comment Share on other sites More sharing options...
CPUWIZ Posted November 28, 2023 Share Posted November 28, 2023 I should have some more left, but my stuff isn't open source. Bit busy these days, organize a batch with someone and get back here with it. And know what you want please, E.G. PCB + PLD (16K) Quote Link to comment Share on other sites More sharing options...
Albert Posted November 28, 2023 Author Share Posted November 28, 2023 I think I still have a bunch of these as well if you don't, @CPUWIZ. ..Al Quote Link to comment Share on other sites More sharing options...
+Yurkie Posted November 28, 2023 Share Posted November 28, 2023 1 hour ago, CPUWIZ said: I should have some more left, but my stuff isn't open source. Bit busy these days, organize a batch with someone and get back here with it. And know what you want please, E.G. PCB + PLD (16K) I got to say this is one more super cool thing that you @CPUWIZ did that I wasn't previously aware of. 1 Quote Link to comment Share on other sites More sharing options...
maddigor2 Posted November 28, 2023 Share Posted November 28, 2023 I am looking to build NTSC versions of Klax and Fatal Run for personal use, and for learning. So based on what I found online I would need F6SC and F4SC. I would probably want a spare of each in case I mess up. Thanks, Matt But, Fatal Run is less of a priority now since Atari will now be releasing Fatal Run as an XP cartridge. Although I hate to open it since it is limited. I really wish they would build standard versions too. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.