Fujix Posted November 18, 2011 Share Posted November 18, 2011 Joystick is fine but neither button works. I opened it and cleaned the contacts (under the rubber caps plus the circuit board) and it worked for a day or two and now doesn't work again. Even shorting the button circuit board with a screwdriver tip doesn't work. Before I start desoldering/soldering all connections are there any known issues with this controllers? Anywhere I should check before I pull it apart again? Thanks Quote Link to comment Share on other sites More sharing options...
+Mitch Posted November 18, 2011 Share Posted November 18, 2011 Could be a bad wire in the cable. If that's the case you would need to replace the cable. Or it could be that the cable is not seated all the way inside the controller. Mitch Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.