Rob Mitchell Posted January 15, 2012 Share Posted January 15, 2012 Finally I am finding time to Modify the iCade. There are 16 small screws that hold the plastic control module shells together. Inside are all quality microswitches: 12 in all with both NO and NC and use a common ground. The wires for the joystick are soldered to the switches. The wires for the push buttons are slide on connectors and they are held in place with a small tab. I removed each one to switch the wires with ground for easier soldering of wires. Here are some pics of the guts ... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.