SabertoothRetro Posted July 27, 2013 Share Posted July 27, 2013 I've never had a 5200 but in the interest of having an example of each Atari home console I am considering it. I almost pulled the trigger on a listing today but the seller never responded to my questions regarding testing. The auction ended with no bids w/ a start of $100. It seemed like one of the nicer two port units and included a handful of boxed commons. EBay and Craigslist all over the place so it's hard for me to gauge pricing. What's a fair price for a CIB unit in good working/cosmetic condition? One with at least a single working controller? Quote Link to comment Share on other sites More sharing options...
MIKE5200 Posted July 27, 2013 Share Posted July 27, 2013 I'm going to say $15-$20 if its just a console and controller. $100 is to high for one. Good Luck Quote Link to comment Share on other sites More sharing options...
SabertoothRetro Posted July 27, 2013 Author Share Posted July 27, 2013 Thanks! I wish I could score something below $50. I havent seen anything in the $20 range that looks clean. I have bad luck at yard sales and eBay is way higher for most working units. People on CL in this area are even worse with pricing. Things like: "$300 bucks with PAC-Man!" The unit that I mentioned was a CIB unit, very clean with two controllers and 6 boxed commons. The seller wrote back after the bid ended and said the unit turns on but is not fully tested. He hadn't tried the controllers so this is probably a resale. They have red balls on the stock 5200 controllers so they could be modded (?).He's relisted at $75 but not BIN. I would like to stay below that for a clean unit with a guaranteed working controller. Wish me luck! Quote Link to comment Share on other sites More sharing options...
jetset Posted July 27, 2013 Share Posted July 27, 2013 The seller wrote back after the bid ended and said the unit turns on but is not fully tested. Untested usually means unworking. PARTICULARLY if the entire setup is there and the seller is too fucking lazy to test it. Be patient. If you're looking on Ebay Sunday is still the best day for buyers. So many items ending many go under the radar and you can get a working system dirt cheap. Quote Link to comment Share on other sites More sharing options...
AtariBrian Posted July 27, 2013 Share Posted July 27, 2013 15 - 20 ... come on now . Quote Link to comment Share on other sites More sharing options...
Charlie_ Posted July 27, 2013 Share Posted July 27, 2013 15 - 20 ... come on now . Yeah... A working system in good shape is going to be $40-$75 easy. Quote Link to comment Share on other sites More sharing options...
jetset Posted July 27, 2013 Share Posted July 27, 2013 $15-20 is a little silly, but several auctions in the past few weeks ended under $50 in box with games. Tested working. http://rover.ebay.com/rover/1/711-53200-19255-0/1?ff3=4&pub=5574883395&toolid=10001&campid=5336500554&customid=&mpre=http%3A%2F%2Fwww.ebay.com%2Fitm%2FAtari-5200-System-and-games-%2F281137369895%3Fpt%3DVideo_Games%26hash%3Ditem417517d327%26nma%3Dtrue%26si%3DtiCj%25252FXg6fc3znLafa8Kl1wrYTyE%25253D%26orig_cvip%3Dtrue%26rt%3Dnc%26_trksid%3Dp2047675.l2557 http://rover.ebay.com/rover/1/711-53200-19255-0/1?ff3=4&pub=5574883395&toolid=10001&campid=5336500554&customid=&mpre=http%3A%2F%2Fwww.ebay.com%2Fitm%2FATARI-5200-CONSOLE-GENTLY-USED-W-ORIGINAL-BOX-6-GAMES-%2F151085055069%3Fpt%3DVideo_Games%26hash%3Ditem232d5efc5d%26nma%3Dtrue%26si%3DtiCj%25252FXg6fc3znLafa8Kl1wrYTyE%25253D%26orig_cvip%3Dtrue%26rt%3Dnc%26_trksid%3Dp2047675.l2557 http://rover.ebay.com/rover/1/711-53200-19255-0/1?ff3=4&pub=5574883395&toolid=10001&campid=5336500554&customid=&mpre=http%3A%2F%2Fwww.ebay.com%2Fitm%2Fatari-5200-System-In-Original-Box-With-Games-Cib-%2F231014731907%3Fpt%3DVideo_Games%26hash%3Ditem35c98d1083%26nma%3Dtrue%26si%3DtiCj%25252FXg6fc3znLafa8Kl1wrYTyE%25253D%26orig_cvip%3Dtrue%26rt%3Dnc%26_trksid%3Dp2047675.l2557 (ok this one was $51 bucks...) Of course then there's shipping, and the 5200 is big and heavy so tack on $30 bucks or so to the price. If you're looking on the higher side, $75 or so, you should get a working system with many games, and working controllers. Patience pays. 1 Quote Link to comment Share on other sites More sharing options...
AtariBrian Posted July 27, 2013 Share Posted July 27, 2013 (edited) If the auction does not specify working controllers ... they dont work ! But those were good prices on those auctions Edited July 27, 2013 by AtariBrian 1 Quote Link to comment Share on other sites More sharing options...
MIKE5200 Posted July 27, 2013 Share Posted July 27, 2013 Maybe I was a little low $40-$50 though you never know what you find at fleamarkets. Don't forget to look in the Market place to. Quote Link to comment Share on other sites More sharing options...
jetset Posted July 27, 2013 Share Posted July 27, 2013 If the auction does not specify working controllers ... they dont work ! But those were good prices on those auctions True, the odds of getting a 5200 set with working controllers is slim to none. But on the bright side all you need is some tin foil and a tiny amount of know-how and you can have them working just fine. Quote Link to comment Share on other sites More sharing options...
20ohm20 Posted July 28, 2013 Share Posted July 28, 2013 I almost pulled the trigger on a listing today but the seller never responded to my questions regarding testing. I consider this a red flag, especially if you contact the owner two days or more before the auction ends. Quote Link to comment Share on other sites More sharing options...
MAC-42 Posted July 28, 2013 Share Posted July 28, 2013 I just picked up a 4-controller 5200 with three joysticks, a dual-joystick holder, and three games--simple common stuff, Pac-Man etc.--for about $40 shipped on eBay. The seller said (and the pictures show) that the unit powers up and games load, but that he could not start them. I took a gamble that it was just the buttons on the sticks that were broken and hope to make some repairs with a little help from Best. I have no practical experience with the 5200, so I'm wondering how I did. Any thoughts? Quote Link to comment Share on other sites More sharing options...
7800 Posted July 28, 2013 Share Posted July 28, 2013 I personally don't like to deal with sellers who don't have the courtesy to respond to questions. And my limit would be $60 for a 5200 in nice shape with 2 controllers... and at least one game. I would hold out until you find one in nice cosmetic shape since they are getting harder to find... Unless you don't care about what it looks like. Quote Link to comment Share on other sites More sharing options...
RodLightning Posted July 28, 2013 Share Posted July 28, 2013 I just picked up a 4-controller 5200 with three joysticks, a dual-joystick holder, and three games--simple common stuff, Pac-Man etc.--for about $40 shipped on eBay. The seller said (and the pictures show) that the unit powers up and games load, but that he could not start them. I took a gamble that it was just the buttons on the sticks that were broken and hope to make some repairs with a little help from Best. I have no practical experience with the 5200, so I'm wondering how I did. Any thoughts? Not bad, especially if you can get the controllers to work. The start-pause-reset buttons can be accessed without taking the entire controller apart. A video by Dylan King describes how to clean the contacts using a pencil eraser. I recommend being a little more careful and going slower than Dylan, as the parts are all delicate and easily damaged, but his info and technique is good. Success depends upon how worn out the contact surfaces are on the rubber buttons. I have personally used a Q-tip and alcohol on the rubber switches as well. Quote Link to comment Share on other sites More sharing options...
AtariBrian Posted July 28, 2013 Share Posted July 28, 2013 Not bad, especially if you can get the controllers to work. The start-pause-reset buttons can be accessed without taking the entire controller apart. A video by Dylan King describes how to clean the contacts using a pencil eraser. I recommend being a little more careful and going slower than Dylan, as the parts are all delicate and easily damaged, but his info and technique is good. Success depends upon how worn out the contact surfaces are on the rubber buttons. I have personally used a Q-tip and alcohol on the rubber switches as well. http://www.youtube.com/watch?v=UADuUdgrbug I have also done this to more than 1 controller and after a short time they wont work again im my experience . I do the dot trick to mine and have 1 gold kit for another . Quote Link to comment Share on other sites More sharing options...
7800 Posted July 28, 2013 Share Posted July 28, 2013 I think the unfortunate reality is that every so often, the CX-52 needs to be taken apart and cleaned so they can work properly. That's just the way it is with these things. The analog sliders need to be lubed up too once in a while. Quote Link to comment Share on other sites More sharing options...
SabertoothRetro Posted July 28, 2013 Author Share Posted July 28, 2013 Thanks for the feedback. I think that I may just keep watching or try for a trade in the marketplace. Quote Link to comment Share on other sites More sharing options...
boxpressed Posted July 28, 2013 Share Posted July 28, 2013 You've already received great advice, but this article from my blog may answer other questions you have: http://retroauction.com/buying-and-selling-an-atari-5200/ I'd say that any CIB 5200 with two working controllers, good condition box, and foam/cardboard inserts for $100 is a good deal. 1 Quote Link to comment Share on other sites More sharing options...
Illtiger1 Posted July 29, 2013 Share Posted July 29, 2013 boxpressed has a great informative guide. That aside, yard sales are usually a waste of time for certain systems as most people have off loaded or even thrown out older systems like that years ago. On Ebay, if you have patience and keep up on your watch list, you will find a good deal for one as jetset was kind enough to provide evidence of. A tested unit with no or broken controllers for a great price is almost ideal in my opinion because you will probably want or need a refurbished controller eventually. 2 Quote Link to comment Share on other sites More sharing options...
SabertoothRetro Posted July 30, 2013 Author Share Posted July 30, 2013 (edited) You've already received great advice, but this article from my blog may answer other questions you have: http://retroauction.com/buying-and-selling-an-atari-5200/ I'd say that any CIB 5200 with two working controllers, good condition box, and foam/cardboard inserts for $100 is a good deal. That's a fantastic buyer's guide! Thanks for putting together such thorough and helpful information. Edited July 30, 2013 by atariLBC 1 Quote Link to comment Share on other sites More sharing options...
Seethransom Posted July 31, 2013 Share Posted July 31, 2013 Don't Forget to look at Amazon frequently. I just got a 4 port system, with 2 aftermarket controllers, cords, and 2 joysticks (prob just use for Space Dungeon). I'm assured it all works. I paid $30.30, plus like 8 bucks for shipping. Seller was quick to respond. You have to find a person who wants to get it out of the house, but has a reasonable mind for price. Low prices move. So, check daily. This is also Yard Sale season. I always find tons of good stuff. Good way to spend a morning. People just want to get rid of "crap", so it never hurts to haggle. Good luck. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.