Xebec Posted November 17, 2013 Share Posted November 17, 2013 Hi Folks, I attempted the .ATR upgrade of U1MB to version 2, and it failed on the first bank. When it asked me if I wanted to restart, I hit 'n' assuming that would take me back to SpartaDOSX to re-load the program. Of course not Is there someone here who would (for a fee) flash my U1MB for me? Thanks much, John H near Philadelphia Pennsylvania, USA Quote Link to comment Share on other sites More sharing options...
Roydea6 Posted November 17, 2013 Share Posted November 17, 2013 http://atariage.com/forums/topic/181257-siccart-preorder/?p=2666844 This is the type of setup that I have for re flashing my PLCC roms. If I do it for you I would only need you to PM me for address and return address. No charge provided the PLCC chip you send is not bad. Do you have a method of extracting the PLCC rom, and mail only the PLCC chip. PM for other info.. I am located in Arizona USA I also have a Burner like this one. Quote Link to comment Share on other sites More sharing options...
+Stephen Posted November 17, 2013 Share Posted November 17, 2013 I have that same burner - it's fast and cheap. Quote Link to comment Share on other sites More sharing options...
phoenixdownita Posted November 18, 2013 Share Posted November 18, 2013 Bought the same one, let's see if I can fix mine Quote Link to comment Share on other sites More sharing options...
Kyle22 Posted November 19, 2013 Share Posted November 19, 2013 I have the same problem here: http://atariage.com/forums/topic/210066-u1mb-flasher-timeout-error/ Trub sent me a flasher that worked great a few times, then I somehow bricked it. It had to be something I did, because it worked before. I am trying to decide between AtariMax 8 cart, or universal programmer. If I get mine fixed, I can fix yours as well. I'm in Pittsburgh, so we're not too far. -K Quote Link to comment Share on other sites More sharing options...
atari8warez Posted November 19, 2013 Share Posted November 19, 2013 I have that same burner - it's fast and cheap. I have the same one too and agreed (fast and cheap, does a very good job) Quote Link to comment Share on other sites More sharing options...
Kyle22 Posted November 19, 2013 Share Posted November 19, 2013 I ordered one of those yesterday. Quote Link to comment Share on other sites More sharing options...
phoenixdownita Posted November 26, 2013 Share Posted November 26, 2013 As the PO managed to git his one fixed? Quote Link to comment Share on other sites More sharing options...
Kyle22 Posted December 7, 2013 Share Posted December 7, 2013 I received my programmer and fixed my U1MB on the first try. Let me know if you want me to program your chip. -K 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.