mos6507 Posted August 9, 2014 Share Posted August 9, 2014 I think it's time to start a fresh thread considering the original AtariVox+ thread is several years old. I assumed that the amount that I built and (eventually) distributed through GoldenAx would fully satisfy demand, but a few people have piped up to say they missed out. I do not know the total number of classic gaming fans and how many of them don't already have one of the prior runs of AtariVox+ or prior single-platform units. But the decision's been made to stock up in a big way. As of the date of this post, we have over 60 AtariVox+ boards fully assembled and ready for final testing and packaging. In total we have over 300 SpeakJet chips that can be used for future boards, by virtue of another generous bulk-discount from Magnevation. Assuming the chips remain available, that same price-break will stay open for us going forward. Since we have many more than 300 PCBs left, I can't imagine there will ever come a time when demand will exceed supply--just as long as there's someone willing to keep investing the time to assemble them. I've sacrificed a lot of time and money building these with the sole purpose being to popularize speech synth in homebrews. I'd like to keep the final retail cost of the AA-edition of the AV+ as low as possible while still allowing myself to break-even on my recent overhead and to satisfy AA's own financial expectations. Since I doubt I'll have much free time to put labor into these beyond the summer, I want to transition myself off the responsibility of assembly and let AA assume full control of it going forward. The only real point of concern is the soldering of the PIC chip. At over $2 a pop, if it doesn't go on well, it wastes a lot of time and money. So I'm still somewhat protective of the assembly process. So we'll see how that hand-off process goes. But I had this first batch already partially assembled (including the PIC) going into this revival, and so it was fairly easy for me to finish adding the missing components myself, making it so that AA needs to only package it up and sell. I'll leave it to Albert to post updates related to that final phase of production here. 4 Quote Link to comment Share on other sites More sharing options...
Richard H. Posted August 9, 2014 Share Posted August 9, 2014 The only real point of concern is the soldering of the PIC chip It might be worth getting a solder paste stencil made. Quote Link to comment Share on other sites More sharing options...
ZuluGula Posted August 18, 2014 Share Posted August 18, 2014 I will buy one. Quote Link to comment Share on other sites More sharing options...
Janzl Posted September 26, 2014 Share Posted September 26, 2014 I will buy one for sure! Quote Link to comment Share on other sites More sharing options...
Hyperboy Posted September 26, 2014 Share Posted September 26, 2014 I'm in for a couple! Quote Link to comment Share on other sites More sharing options...
AtariKari Posted November 9, 2014 Share Posted November 9, 2014 Hi, Thank you so much for considering making these again. I am definitely in for at least one! Quote Link to comment Share on other sites More sharing options...
Albert Posted December 14, 2014 Share Posted December 14, 2014 The AtariVox+ is now available in the AtariAge Store: http://atariage.com/store/index.php?l=product_detail&p=1045 Here's a list of 2600 homebrews that take advantage of the AtariVox: http://atariage.com/store/index.php?l=product_list&c=98 ..Al Quote Link to comment Share on other sites More sharing options...
Richard H. Posted December 14, 2014 Share Posted December 14, 2014 Merry.wav Quote Link to comment Share on other sites More sharing options...
Albert Posted December 14, 2014 Share Posted December 14, 2014 That's great, I assume that's from the AtariVox (or at least a SpeakJet?) Do you mind if I use that in the store? ..Al Quote Link to comment Share on other sites More sharing options...
Richard H. Posted December 15, 2014 Share Posted December 15, 2014 I assume that's from the AtariVox (or at least a SpeakJet?) Yes Do you mind if I use that in the store? Sure Here's another one Frosty.wav Quote Link to comment Share on other sites More sharing options...
opossumita Posted January 16, 2015 Share Posted January 16, 2015 Hi, I missed the AtariVox+ and at the moment it's not possible to order it from the store anymore. Hope it is going to be available again soon... Let me know. Thank You. Quote Link to comment Share on other sites More sharing options...
Albert Posted January 16, 2015 Share Posted January 16, 2015 More will be available soon! ..Al 1 Quote Link to comment Share on other sites More sharing options...
opossumita Posted January 16, 2015 Share Posted January 16, 2015 More will be available soon! ..Al Thanks for reply Albert ^^^^ Quote Link to comment Share on other sites More sharing options...
Serblander Posted January 24, 2015 Share Posted January 24, 2015 More will be available soon! ..Al FANTASTIC! Just looked at all the AtariVox supported games and one of the games' music track is burrowing into my brain (and has been on loop for the last hour)! MUST HAVE! Will have to wait to order the game along with the AtariVox+ the moment i get notification of a new batch in store! The enhanced music and High Score ability will go down a treat at events and expos to boot! Quote Link to comment Share on other sites More sharing options...
opossumita Posted January 24, 2015 Share Posted January 24, 2015 Same for me, can't wait Quote Link to comment Share on other sites More sharing options...
steve0210 Posted April 19, 2015 Share Posted April 19, 2015 I watched the YT demo 'Atari 2600 Harmony Encore and AtariVOX+ game play video and review.' and I am looking forward to getting one. Will the store get it by the end of the year? Quote Link to comment Share on other sites More sharing options...
Albert Posted April 19, 2015 Share Posted April 19, 2015 I watched the YT demo 'Atari 2600 Harmony Encore and AtariVOX+ game play video and review.' and I am looking forward to getting one. Will the store get it by the end of the year? It has been in the AtariAge Store twice recently, but sells relatively quickly. I am working on making a larger batch that should satiate demand for a while. In the meantime, I have one remaining AtariVox+ from existing inventory. If you'd like it, send me a PM and it's yours ($40 plus shipping, depending on where you are). ..Al Quote Link to comment Share on other sites More sharing options...
Richard H. Posted May 5, 2015 Share Posted May 5, 2015 AAMOI I lost my Sega extension cord (needed for Vectrex and 7800), so I hacked this together. It's the insides of a DB9 socket and plug. Drill out the mounting lugs and the 2 halves of the shielding come apart. Run a small amount of glue around the inserts and solder them together (see pics). Quote Link to comment Share on other sites More sharing options...
Albert Posted June 23, 2015 Share Posted June 23, 2015 I don't have a Vectrex handy to test this, but does the AtariVox+ fit in the controller port of the Vectrex without an extension cable? ..Al Quote Link to comment Share on other sites More sharing options...
Richard H. Posted June 23, 2015 Share Posted June 23, 2015 does the AtariVox+ fit in the controller port of the Vectrex without an extension cable? No Quote Link to comment Share on other sites More sharing options...
Albert Posted June 23, 2015 Share Posted June 23, 2015 No Thanks! I need to get some Sega Genesis extension cables so I can bundle them with the AtariVox+. ..Al Quote Link to comment Share on other sites More sharing options...
Richard H. Posted June 23, 2015 Share Posted June 23, 2015 Build some of the DB9 adapters, cheap and will never become unavailable Quote Link to comment Share on other sites More sharing options...
iesposta Posted June 23, 2015 Share Posted June 23, 2015 Thanks! I need to get some Sega Genesis extension cables so I can bundle them with the AtariVox+. ..Al Al, The four corners of the Sega extension cable have sliced off or it will not fit down into the Vectrex controller port. Quote Link to comment Share on other sites More sharing options...
CPUWIZ Posted June 28, 2015 Share Posted June 28, 2015 It might be worth getting a solder paste stencil made. Richard, do you know of an off the shelve solder paste stencil for the PIC package? You know, something like this... http://www.karlssonrobotics.com/cart/SOIC-18-1.27-mm-pitch-Stainless-Steel-Stencil/ Cheers. Quote Link to comment Share on other sites More sharing options...
Richard H. Posted June 29, 2015 Share Posted June 29, 2015 That one will do it. Good price too. 2 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.