+OLD CS1 Posted September 20, 2014 Share Posted September 20, 2014 I took the doors off purposely. They make the cart harder to line up and insert. But - Hey, it's your cart now! Well, see, that is good information to have, so I will not. You have thus saved my cartridge from dissection. 1 Quote Link to comment Share on other sites More sharing options...
JCCyC Posted September 20, 2014 Share Posted September 20, 2014 There's a whole bunch of messages regarding it. This is the one I posted at the same time I announced the first sale here. https://groups.yahoo.com/neo/groups/TI994A/conversations/messages/8984 What's your username there? I can check your notification options if you'd like. Gazoo What the...? I read the group by e-mail only, and all messages BUT THAT ONE came through! It doesn't show in "Conversations" either, neither in "Messages" nor in "Topics"! And I can't reply to it! I am Juan Castro there. (Woody Woodpecker avatar.) I just started a new topic there. Quote Link to comment Share on other sites More sharing options...
+Vorticon Posted September 21, 2014 Share Posted September 21, 2014 I found a quirk with the cart: When used with the Navarone Widget multicart selector, this cart gets selected regardless of where the switch is and what other carts are on the Widget. I tried it with two different Widgets, and the result was the same. The Widgets work just fine when the Suite cart is not installed. Any clues as to why? Quote Link to comment Share on other sites More sharing options...
+Ksarul Posted September 21, 2014 Share Posted September 21, 2014 (edited) That is an issue specific to the ÜberGROM board itself. It does not like Widgets. We looked for a way to make it work with a Widget, but found no solution that would do the trick properly. See the notes on this from Tursi in the 512K cartridge thread (we're adding this note to the ÜberGROM manual as well). It is the only incompatibility we've found to date for the ÜberGROM board. Edited September 21, 2014 by Ksarul Quote Link to comment Share on other sites More sharing options...
Omega-TI Posted September 21, 2014 Share Posted September 21, 2014 I found a quirk with the cart: When used with the Navarone Widget multicart selector, this cart gets selected regardless of where the switch is and what other carts are on the Widget. I tried it with two different Widgets, and the result was the same. The Widgets work just fine when the Suite cart is not installed. Any clues as to why? Yeah, I noticed that too. I was told NOT to use the widget with the XB2.7s cart, but since the cart has so much stuff on it, I really don't have to switch carts much, except for Multiplan and when I want to use my Super Cart. Quote Link to comment Share on other sites More sharing options...
Tursi Posted September 21, 2014 Share Posted September 21, 2014 Yes, do NOT use a Widget with the ubergrom -- or rather, use it at your own risk. The design of the Widget is such that the UberGROM and any other GROM selected will both drive the lines at the same time. We could not come up with a reasonable circuit to work around this, as the Widget only switches the -5v on and off to the GROM, rather than something useful like GROM select. (If someone can come up with a good simple circuit to convert presence or absence of -5v into something positive that the AVR can detect, we can add that. The main wrinkle is there is leakage from the reset circuit even when the -5v is not selected, I couldn't make it go, even with an optoisolator.) Anyway, people are fairly comfortable with overriding the console GROMs, we know what is there and it's well tested, but we don't know what is on other cartridges. You may damage the other GROMs. Worse, if the other cartridges contain another GROM simulator of any type, there is strong likelihood that both cartridges will drive the GROM lines at full strength at the same time, and this likely WILL damage one or the other (and possibly the console). No widgets! 3 Quote Link to comment Share on other sites More sharing options...
Omega-TI Posted September 21, 2014 Share Posted September 21, 2014 Yes, do NOT use a Widget with the ubergrom -- or rather, use it at your own risk. Even with that caveat, it's still the best damn cartridge I've ever owned and I still give it my 100% recommendation, not that my opinion means much really, but I do love this thing. Quote Link to comment Share on other sites More sharing options...
+OLD CS1 Posted September 21, 2014 Share Posted September 21, 2014 Considering the amount of software crammed into the cartridge, it might be well to call it its own widget which is mutually exclusive of others. 3 Quote Link to comment Share on other sites More sharing options...
unhuman Posted September 22, 2014 Share Posted September 22, 2014 Yeah, I'm pretty jealous of those who have and hope to get one - those that do are clearly lucky ducks! Quote Link to comment Share on other sites More sharing options...
+Vorticon Posted September 22, 2014 Share Posted September 22, 2014 Yes, do NOT use a Widget with the ubergrom -- or rather, use it at your own risk. The design of the Widget is such that the UberGROM and any other GROM selected will both drive the lines at the same time. We could not come up with a reasonable circuit to work around this, as the Widget only switches the -5v on and off to the GROM, rather than something useful like GROM select. (If someone can come up with a good simple circuit to convert presence or absence of -5v into something positive that the AVR can detect, we can add that. The main wrinkle is there is leakage from the reset circuit even when the -5v is not selected, I couldn't make it go, even with an optoisolator.) Anyway, people are fairly comfortable with overriding the console GROMs, we know what is there and it's well tested, but we don't know what is on other cartridges. You may damage the other GROMs. Worse, if the other cartridges contain another GROM simulator of any type, there is strong likelihood that both cartridges will drive the GROM lines at full strength at the same time, and this likely WILL damage one or the other (and possibly the console). No widgets! Good to know... Luckily I didn't damage anything Quote Link to comment Share on other sites More sharing options...
Omega-TI Posted September 26, 2014 Share Posted September 26, 2014 Okay, I cannot lie about this cartridge, and I'm going to give it a BRUTALLY HONEST APPRAISAL. After having used this cartridge for a while now, and never seeming to remove it (because it does damn near everything) I can truthfully say, "It's the best damn cartridge I've ever owned on the TI-99/4A, PERIOD." That's it! When he makes his next run, you better scarf one up, because I doubt they'll last long. 1 Quote Link to comment Share on other sites More sharing options...
Fritz442 Posted September 26, 2014 Share Posted September 26, 2014 I would love to get one on the next run, Please. Quote Link to comment Share on other sites More sharing options...
Gazoo Posted September 27, 2014 Author Share Posted September 27, 2014 The second batch of cartridges is complete. There are a total of 14 cartridges for sale. One per customer. Price is $40, shipping included, to continental US only.A message is being posted on the TI Yahoo group concurrently with this one.The cartridges will be sold to the first 14 responders whether the response is from here or the TI Yahoo group.I can accept Paypal, check or money order.Gazoo 1 Quote Link to comment Share on other sites More sharing options...
+Ksarul Posted September 27, 2014 Share Posted September 27, 2014 Excellent work there, Gazoo! :) Quote Link to comment Share on other sites More sharing options...
+acadiel Posted September 27, 2014 Share Posted September 27, 2014 I want one. Love the label! Quote Link to comment Share on other sites More sharing options...
+Ksarul Posted September 27, 2014 Share Posted September 27, 2014 They are beautiful and work like a charm! Quote Link to comment Share on other sites More sharing options...
jstimson Posted September 27, 2014 Share Posted September 27, 2014 Please! Want! But I'm in Canada! But seriously! Encourage my continued interest in the TI! Quote Link to comment Share on other sites More sharing options...
dphirschler Posted September 27, 2014 Share Posted September 27, 2014 (edited) I'm in. PM sent. Been waiting for this. Darryl Edited September 27, 2014 by dphirschler Quote Link to comment Share on other sites More sharing options...
Bill Loguidice Posted September 27, 2014 Share Posted September 27, 2014 I definitely still want one. PM sent. Quote Link to comment Share on other sites More sharing options...
vectrexroli Posted September 27, 2014 Share Posted September 27, 2014 I would like to buy one, but I am in Europe. PM sent. Quote Link to comment Share on other sites More sharing options...
JCCyC Posted September 27, 2014 Share Posted September 27, 2014 (edited) Three two for me, please! (two one for me and one for a friend) If not admissible, just one, but I'd like to pass at least another cartridge to a friend of mine who doesn't post here. Edited September 27, 2014 by JCCyC Quote Link to comment Share on other sites More sharing options...
Lisias Posted September 27, 2014 Share Posted September 27, 2014 I want one, thank you! Quote Link to comment Share on other sites More sharing options...
JCCyC Posted September 27, 2014 Share Posted September 27, 2014 (edited) I want one, thank you! Ah... yeah. That was the guy I was talking about. And there's probably a third one who'll post here shortly. We hang around at Facebook here (in Portuguese): https://www.facebook.com/groups/retrocomputaria/ Edited September 27, 2014 by JCCyC Quote Link to comment Share on other sites More sharing options...
Omega-TI Posted September 27, 2014 Share Posted September 27, 2014 Damn, your cartridge is even bringing out the lurkers! 1 Quote Link to comment Share on other sites More sharing options...
JCCyC Posted September 27, 2014 Share Posted September 27, 2014 Damn, you're cartridge is even bringing out the lurkers! Blame it on Brazil! https://www.facebook.com/groups/retrocomputaria/permalink/752114758179563/ https://www.facebook.com/groups/retrocomputaria/permalink/755832567807782/ 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.