Justin Payne Posted August 6, 2016 Share Posted August 6, 2016 Hey all, I wanted to get back into 3D rendering. It's been some time since I did this so my skilz are a bit rusty but I'm sure it will all come back to me. I thought I would start off by rendering the 5200. Now, I don't own a 5200 anymore and I haven't quite been able to find detailed dimensions. Depending on how detailed I want the model to be, it could be as simple as one model or models of each section (cable wrap post, case bottom, motherboard, top cover, controller storage cover). I'd then move onto the controller, and finally any other accessories such as the trackball. Now, how people start off doing this is they get relatively straight on images of each side of the thing they want to render it, they place those image into their rendering software, and start connecting dots to eventually build a model. Here is an example... Again, I found nothing online like this for the 5200. So, for those interested in something like this (and possibly future renders), can you... Provide me with drawings of the 5200 at those straight on points Provide me with those types of photos OR provide me with detailed measurements of the unit? (This one I think it waaaay to much work) David Vucetic said he'd be willing to do this but I figured I'd ask the rest of the community just in case someone already had this. This also gives me an opertunity to see if there is anything they would want to see in the rendering. Thanks in advance... 1 Quote Link to comment Share on other sites More sharing options...
Atari the Jedi Posted August 6, 2016 Share Posted August 6, 2016 I know what I would like to see is the cover plate for a two port system. I could also use the cord wrap myself. Currently my two Port is having to sport a 4-port cover plate. Quote Link to comment Share on other sites More sharing options...
Justin Payne Posted August 6, 2016 Author Share Posted August 6, 2016 Yea, that's a good point. I'd probably want to render the many versions bit probably focus on the 4 port first. After I get one done, the others should be a simple modification to thr model. Quote Link to comment Share on other sites More sharing options...
David Alexander Posted August 6, 2016 Share Posted August 6, 2016 Looking forward to seeing the 5200 in 3D. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.