Problems with new FlashROM 99 board

[+arcadeshopper]

Forgot to mention...I'm not using External power on either.

The issue is with the external power and the sdcard readers I used for the boards I built. Others are not affected. And all new boards I build will be using different readers that don't have that problem

 

Sent from my LG-H830 using Tapatalk

[AuTomato]

The issue is with the external power and the sdcard readers I used for the boards I built. Others are not affected. And all new boards I build will be using different readers that don't have that problem

 

Sent from my LG-H830 using Tapatalk

 

It's no biggie. I'm probably going to be using my NanoPEB for the foreseeable future so it's not a problem for me anymore though if you wouldn't mind letting me know which model reader board you're using as a replacement in case I want to retrofit mine later, that'd be great. I've got STLs for a 3D printed enclosure that I'd ideally like to use, but it looks like the reader stands off too far for it to fit as it is. I figure that if I'm going to have to desolder the SD board anyway to refit it, I may as well replace it with the "better" unit.

[+arcadeshopper]

 

It's no biggie. I'm probably going to be using my NanoPEB for the foreseeable future so it's not a problem for me anymore though if you wouldn't mind letting me know which model reader board you're using as a replacement in case I want to retrofit mine later, that'd be great. I've got STLs for a 3D printed enclosure that I'd ideally like to use, but it looks like the reader stands off too far for it to fit as it is. I figure that if I'm going to have to desolder the SD board anyway to refit it, I may as well replace it with the "better" unit.

 

https://www.amazon.com/gp/product/B00VFH0YS0/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1

[AuTomato]

 

https://www.amazon.com/gp/product/B00VFH0YS0/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1

Thanks so much!

[Stormbringer]

On 2/13/2017 at 1:32 AM, arcadeshopper said:

The issue is with the external power and the sdcard readers I used for the boards I built. Others are not affected. And all new boards I build will be using different readers that don't have that problem

 

Sent from my LG-H830 using Tapatalk

 

Hey, sorry to necrobump but I have a FlashROM99 that I bought years ago and just recently got around to trying out. It's ehibiting the same 4.5v on the 3.3v line for the SD card reader. The Amazon listing you posted no longer is in stock. do you have another source for a replacement SD reader?!?!

[+arcadeshopper]

1 hour ago, Stormbringer said:

 

Hey, sorry to necrobump but I have a FlashROM99 that I bought years ago and just recently got around to trying out. It's ehibiting the same 4.5v on the 3.3v line for the SD card reader. The Amazon listing you posted no longer is in stock. do you have another source for a replacement SD reader?!?!

No these haven't been built for years now. I will see 

[+OLD CS1]

1 hour ago, Stormbringer said:

 

Hey, sorry to necrobump but I have a FlashROM99 that I bought years ago and just recently got around to trying out. It's ehibiting the same 4.5v on the 3.3v line for the SD card reader. The Amazon listing you posted no longer is in stock. do you have another source for a replacement SD reader?!?!

I bought several a long time ago for this exact purpose.  PM me your information and I can help you out.