darkman Posted June 5, 2003 Share Posted June 5, 2003 Hey gang... took my Atari 400 I got as a Xmas gift way long ago... Cleaned, Referbished it (or tried to). I could get no picture, but it was powering up. After getting some new RG59 cable, and soldering it directly to the MB rather than pluging it into the RF out RCA slot (which appears to be dead). I have a picture again, it's exceptable, but but not great, Even by RF standards. My question is, how to I improve the picture? I know it could look better than this. (and has looked better than this before) I have done everything I can think of. I found a guide to make Composite Video Outputs, but it seems way more complicated than the Atari 2600 Composite Video mod (which I did). Any suggestions would be great. -darkman Link to comment Share on other sites More sharing options...
A2600 Posted June 5, 2003 Share Posted June 5, 2003 2-words!! MONITOR CABLE!! Link to comment Share on other sites More sharing options...
svenski Posted June 5, 2003 Share Posted June 5, 2003 With the 400 you're limited, no monitor out so no easy composite cable as you know. I would try and bring the original rf out back to life rather than using a direct solder connection - hopefully a hardware wiz will give you some help when they see your post. Good luck. Link to comment Share on other sites More sharing options...
atari-passion Posted June 5, 2003 Share Posted June 5, 2003 Hello, the french atari 400 is pal & secam and it with a connector scart for monitor and tv. a very good image A+ Arnaud Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.