klrw111-78 Posted January 12, 2020 Share Posted January 12, 2020 I've been using a TI RS232 card that I modified with HDX for over a year and RS232 ports still work. I've been using a ImageWriter serial printer, but of course it's not "Epson compatible." I recently got a KXP-1123 and purchased a standard TI parallel cable. When attempting to print to PIO, I get print out that is not what it should be. A bunch of "!" and some other letters. I "rang-out" the cable and it appears to be correct. Tried another printer with same result. I think the PIO is not sending all DATA pins out. Any ideas or does anyone have a spare TI RS232 they are willing to part with for a fee? Please PM if so. Thanks Quote Link to comment Share on other sites More sharing options...
+arcadeshopper Posted January 12, 2020 Share Posted January 12, 2020 I've been using a TI RS232 card that I modified with HDX for over a year and RS232 ports still work. I've been using a ImageWriter serial printer, but of course it's not "Epson compatible." I recently got a KXP-1123 and purchased a standard TI parallel cable. When attempting to print to PIO, I get print out that is not what it should be. A bunch of "!" and some other letters. I "rang-out" the cable and it appears to be correct. Tried another printer with same result. I think the PIO is not sending all DATA pins out. Any ideas or does anyone have a spare TI RS232 they are willing to part with for a fee? Please PM if so. ThanksBefore going too far try reloading the dsrSent from my LM-G820 using Tapatalk Quote Link to comment Share on other sites More sharing options...
klrw111-78 Posted January 12, 2020 Author Share Posted January 12, 2020 Before going too far try reloading the dsrSent from my LM-G820 using TapatalkReloading the DSR was the 1st thing I tried. Maybe I'll try the original ROM just to see. Has anyone used the PIO after installing HDX?Sent from my iPad using Tapatalk Quote Link to comment Share on other sites More sharing options...
+arcadeshopper Posted January 12, 2020 Share Posted January 12, 2020 Reloading the DSR was the 1st thing I tried. Maybe I'll try the original ROM just to see. Has anyone used the PIO after installing HDX?Sent from my iPad using TapatalkOk good. Nope I'll have to set one upSent from my LM-G820 using Tapatalk Quote Link to comment Share on other sites More sharing options...
klrw111-78 Posted January 12, 2020 Author Share Posted January 12, 2020 19 hours ago, arcadeshopper said: Ok good. Nope I'll have to set one up Sent from my LM-G820 using Tapatalk I have the same issue when I removed the HDX mods and install the TI rom. It appears the card is bad. If the PIO port on the modified card in your store works, let me know and I will purchase. Thanks Quote Link to comment Share on other sites More sharing options...
Stuart Posted January 13, 2020 Share Posted January 13, 2020 If you're able, try replacing U10 and U11 on the card - both 74LS373. They provide the interface between the PIO connector and the rest of the card. 1 Quote Link to comment Share on other sites More sharing options...
klrw111-78 Posted January 13, 2020 Author Share Posted January 13, 2020 If you're able, try replacing U10 and U11 on the card - both 74LS373. They provide the interface between the PIO connector and the rest of the card.Thanks. Chips on orderSent from my iPad using Tapatalk Quote Link to comment Share on other sites More sharing options...
+Ksarul Posted January 19, 2020 Share Posted January 19, 2020 Didn't the Panasonic require the SmithCorona or the Okidata cable? Quote Link to comment Share on other sites More sharing options...
atrax27407 Posted January 19, 2020 Share Posted January 19, 2020 I think you are correct. Quote Link to comment Share on other sites More sharing options...
klrw111-78 Posted January 19, 2020 Author Share Posted January 19, 2020 23 minutes ago, Ksarul said: Didn't the Panasonic require the SmithCorona or the Okidata cable? I used the pinout posted here for the Panasonic KXP-1091 printer. In looking at the manuals they both have identical Centronics pinouts. After replacing the 74LS373 chips and checking for continuity on the 16-pin connector, I found some damaged traces at the very edge of the card near the PIO connector. I got the card at a very reduced price because the metal shell was severely warped. Just lucky the RS232 worked. After repairing the traces and replacing the chips, it now fails to work at all. Thanks 1 Quote Link to comment Share on other sites More sharing options...
klrw111-78 Posted January 19, 2020 Author Share Posted January 19, 2020 Ordered a replacement from ArcadeshopperSent from my iPad using Tapatalk Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.