TGB1718 Posted October 16, 2020 Share Posted October 16, 2020 Many years ago I got an ICD AdSCSI Micro Adaptor, I believe this is used in a Mega ST I don't own a Mega ST and was wondering how this board connected internally to the ST, the manual says it should have come with a fitting kit which includes a cable that I believe connects to the ST via a 24 pin IDC connector. Does anyone have a wiring diagram, is the connector in the ST 24 pin also ? Reason for asking, I nay as well sell it as I have no use, but would like to include a cable for whoever buys it. thanks Quote Link to comment Share on other sites More sharing options...
ParanoidLittleMan Posted October 16, 2020 Share Posted October 16, 2020 Yes, there is 24 pin connector near to ACSI port. Cable should be same pin to same pin. Since there must be +5V power too (therefore it has more pins than ACSI port) it is easy to follow pin order and make cable. Easy for those with Unimer (ohmmeter) and little knowledge. Schematic of Mega ST is online. Quote Link to comment Share on other sites More sharing options...
TGB1718 Posted October 16, 2020 Author Share Posted October 16, 2020 Thanks, the schematics I found weren't very clear, so wasn't sure Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.